Related Manuals for REED ST-5500
Summary of Contents for REED ST-5500
- Page 1 ST-5500 Model Digital Insulation Tester Instruction Manual reedinstruments REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com...
-
Page 2: Table Of Contents
Low.Resistance.Measurements........... 8 AC/DC.Voltage.Measurements............. 8 Power Tool & Small Appliances............9 Motors..................9 Cables..................10 For service on this or any other REED product, contact REED Instruments at info@reedinstruments.com. reedinstruments REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com... -
Page 3: Safety
Meter is protected throughout by double insulation or rein- forced insulation. When servicing, use only specified replacement parts. CE Comply with EN-61010-1 For service on this or any other REED product, contact REED Instruments at info@reedinstruments.com. reedinstruments REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com... -
Page 4: Specifications
DC 9V (6 x 1.5V Size “AA” battery or equivalent) Dimensions: 200(L) x 92(W) x 50(H) mm Weight: Approx 700g including the batteries Contents: Test leads, 6 batteries, . carrying case and manual reedinstruments REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com... -
Page 5: Electrical
Resolution Accuracy Terminal Voltage 200MΩ/250V 0.1MΩ 250V+10%~-0% 200MΩ/500V 0.1MΩ +(3%+5) 500V+10%~-0% 0~1000MΩ/1000V 1MΩ 1000V+10%~-0% 1000~2000MΩ /1000V +(5%+5) Range Test Current Short circuit current 200MΩ/250V 250KΩ(load) 200MΩ/500V 500KΩ(load) ≤1mA 0~1000MΩ/1000V 1MΩ 1000~2000MΩ /1000V reedinstruments REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com... -
Page 6: Meter Description
00.0Ω. When the leads are not connected the display will read infinity indicated by “1”. This will ensure that test lead are under working condition. reedinstruments REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com... -
Page 7: Battery.replacement
500V and 1000V. First, set the range switch to 1000V and then proceed as indicated in above for 500V testing. continued ... reedinstruments REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com... -
Page 8: Low.resistance.measurements
2. Connect red test lead to “V Ω” terminal and black test lead . to terminal “COM”. 3. Connect test prods of test leads IN PARALLEL to the circuit . being measured. 4. Read the voltage value on LCD. reedinstruments REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com... -
Page 9: Power Tool & Small Appliances
The above also applies to DC Gemerators. reedinstruments REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com... -
Page 10: Cables
/or lead sheather and the other megohmmeter lead to each of the conductors in turn. Check insulation resistance between conductors by connecting megohmmeter leads to conductors in pairs. For service on this or any other REED product, contact REED Instruments at info@reedinstruments.com. reedinstruments REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com...
Need help?
Do you have a question about the ST-5500 and is the answer not in the manual?
Questions and answers