Acnodes PCM8210 User Manual page 12

2.3.2. Adjust
AUTO SETUP
*VGA CHANNEL ONLY
Automatically adjusts screen size, H position, V position, Clock, Clock Phase
AUTO ADJUSTMENT
*VGA CHANNEL ONLY
H Position, V Position and Clock Phase are adjusted automatically upon power on.
H POSITION
*VGA CHANNEL ONLY
Controls the horizontal position of the image within the Display area of the LCD.
Press + to move right. Press - to move left.
V POSITION
*VGA CHANNEL ONLY
Controls the vertical position of the image within the Display area of the LCD.
Press + to move up. Press - to move down.
CLOCK
*VGA CHANNEL ONLY
Press + to expand the width of the image on the right of the screen.
Press - to narrow the width of the image on the left.
PHASE
*VGA CHANNEL ONLY
Adjusts the visual "noise" on the image.
WHITE BALANCE
*VGA CHANNEL ONLY
Perform the white balance
SCALING
Adjust the image scaling setting
ADJUST RESET
Resets the following settings within the ADJUST menu back to factory setting:
PRESS YES TO AUTO SETUP
ON/OFF
slider bar
slider bar
slider bar
slider bar
YES/OFF
@ ASPECT
@ OFF
@ FULL
YES/NO
11