First Switching On - Bticino Classe 300EOS User And Installation Manual

Classe 300EOS
User and installation manual

First switching on

After connecting and switching on the device, (see Wiring diagram), it will be possible to:
– Configure and customise from the menu
Or
– Physically configure and customise from the menu
Wait for the LEDS to stop flashing and then touch the display to switch it on.
Configure and customise from the menu
Note: f the device has already been physically configured, after extracting the configurators, it is
necessary to reset.
DEVICE SETUP
1
Welcome to Classe 300EOS with Netatmo
setup.
Before starting, make sure the device is
correcly plugged.
START
1. Touch to start the customisation.
2. Select the interface language.
3. Touch to continue.
DATE AND TIME
Set date and time
automatically from network
Time will be set automatically once the device
is connected to internet
Timezone Rome (GMT +01)
16 / 06 / 2021
4
10 : 45
CONTINUE
4. Touch to set the automatic time and date update through the NTP server.
5. Touch to set your time zone.
14
LANGUAGE
Choose language
English
Français
Italiano
Español
2
Deutsche
3
Português
CONTINUE
DATE AND TIME
Set date and time
automatically from network
Time will be set automatically once the device
is connected to internet
Timezone Europe/Rome
Date 16/06/2021
Time 10:45:16
5
CONTINUE