System - DIG LEIT RC2ET Instruction Manual

1.

System

1.0 Parts Identification
1. LCD Display
2. Programming Buttons
3. Antenna
4. Battery Socket Outlet
5. Battery Charger
1. LCD Display
Displays the icon based applications stored in the handset.
2. Programming Buttons
Use these five (5) buttons to program, modify, review and communicate
with a LEIT-2 and LEIT-2ET controller.
Use to raise (increase) the value of the selected parameter or
to unlock the secure password and controller ID
Use to lower (decrease) the value of the selected parameter
Use to accept and/or select the desired programming mode
Use to move the cursor to the right
Use to move the cursor to the left
3. Antenna
See FCC compliance.
4. Battery Socket Outlet
Plug the battery charger into the battery socket.
5. Battery Charger
Plug the battery charger into the wall to power the LEIT RC2ET.
d
f
8
b
c
e