Table of Contents
Advertisement
In order to connect to a LEIT-2ET controller, a few Setup steps must be
implemented within the handset MAIN MENU screen. If setting the LEIT
RC2ET handset for the first time, first make sure to set up the handset by
selecting the SETUP icon (below RADIO UPLINK). In going through the steps,
select the SET TIME AND DATE icon and set the time format (AM/PM or 24
hour) then, the time and date. In HANDSET SETUP, assign HANDSET ID and
CLIENT ID for identification purposes for linking to a LEIT-2ET controller. After
setup is complete, exit SETUP to the MAIN MENU. At this point the handset is
ready for communication (see details of each step below).
2.1 Radio Uplink Communication
RADIO UPLINK allows the LEIT RC2ET handset to link to any LEIT-2ET or
LEIT-2 controllers in the area with the same CLIENT ID. To link to a LEIT-2ET
controller that has been installed and configured for communication, select the
RADIO UPLINK icon.
Press
and RADIO UPLINK appears. Press the
appears with the first digit blinking. Select the first digit using the
button, then press
CONTROL ID press
to a LEIT-2ET controller, CONNECTED appears briefly, then CONTROL ID
DESCRIPTION and CONTROLLER SOFTWARE VERSION appear. Press
again, and controller activity, if any, can be reviewed, including the last
weather data received from the weather station. Press
MENU appears.
10:00
10:00
RADIO UPLINK
10:00
10:00
CONTROL ID: XX
DESCRIPTION
HW: 1.8 SW: 3.16
CONNECTED TO:
10:00
10:00
and repeat for the second digit. After selecting
to connect to a LEIT-2ET controller. After connecting
SW V: 1.6
EE V: 1.1
10:00 AM
MONDAY
7/13/2009
TIME / DATE
VERSION
10:00
ARE YOU SURE?
CONTROL ID: XX
DESCRIPTION
RADIO UPLINK
YES / NO
10:00
VALVES CLOSED
LAST ET ACTIVITY
09:24
01 TIMES TODAY
VALVE STATUS
10:00
again and CONTROL ID
10:00
US
MAIN MENU
10:00
CONNECTING
CONNECT
10:00
08/27
CONTROLLER MENU
ALERT
10
or
and CONTROLLER
10:00
CONNECTED
CONNECT
Advertisement
Table of Contents
