Table of Contents
Advertisement
3.
I nitial LEIT-2ET Connection
In order to begin communication with a new LEIT-2ET controller using the
handset, a series of initial setup steps must be undertaken. First, the user
connects to the LEIT-2ET controller via CONTROL ID 00 DEFAULT SETUP.
After connecting to a LEIT-2ET controller, the user must assign the controller
a new CONTROL ID (recommended ID # 2-99). At this stage the user can also
change the existing CLIENT ID of the controller (controller default CLIENT ID is
AAA) as long as it is also changed on the handset after exiting the controller
program. In addition a descriptive controller address or name can be assigned
to the controller with up to fourteen (14) characters to uniquely identify the
location of each LEIT-2ET controller on the system.
10:00
10:00
MAIN MENU
10:00
10:00
CONNECTED
CONNECT
10:00
10:00
CONNECTING
CONNECT
10:00
CONTROL ID: 00
NO DESCRIPTION
RADIO UPLINK
RADIO UPLINK
10:00
UPLOADING
CONTROL ID: XX
NO DESCRIPTION
e
HW: 1.
SW: 3.16
CONNECTED TO
CONNECT
10:00
UPDATE
SUCCESSFUL
CONNECT
CONTROLLER MENU
10:00
ARE YOU SURE?
YES / NO
10:00
CONTROL ID: 01
NO DESCRIPTION
CLIENT ID: AAA
CONT. SETUP
15
10:00
CONNECTING
CONNECT
10:00
ARE YOU SURE?
YES / NO
Advertisement
Table of Contents
