Example; Viewing The User Log Counters; Viewing Configuration - Cisco SCE 2000 Quick Start Manual

Viewing Configuration

To display the operation status of the system, at the SCE 2000# prompt, type
Step 1
operation-status
A message displaying the operation status of the system appears. If the system is operating in order, the
following message appears:
System Operation status is Operational.

Example:

The following example displays a sample output where the LEDs appear red/orange:
SCE 2000#show system operation-statusSystem Operation status is Operational

Viewing the User Log Counters

View the user log for errors that occurred during the installation process.
To display the user log device counters, complete the following steps:
Step 1 At the SCE 2000# prompt, type
EXAMPLE:
The following example shows the current User-File-Log device counters.
SCE 2000#show logger device user-file-log countersLogger device User-File-Log counters:
Total info messages: 1
Total warning messages: 0
Total error messages: 0
Total fatal messages: 0
If there are "Total error messages" or "Total fatal messages", use the show logger device User-File-Log
command to display details about the errors.
Viewing Configuration
When you enter configuration commands, it immediately effects the SCE platform operation and
configuration. This configuration, referred to as the
volatile memory and is effective while the SCE platform is up. After reboot, the SCE platform loads the
startup-config
running-config
The SCE platform provides commands for:
•
•
Cisco SCE 2000 4xGBE Quick Start Guide
6-2
and press Enter.
, which includes the non-default configuration as saved by the user, into the
.
Viewing the running configuration
Viewing the startup configuration
show logger device User-File-Log counters
running-config
Chapter 6 Completing the Installation
show system
and press Enter.
, is saved in the SCE platform
OL-7820-06