Pendant Startup - Simplex G5 Instruction Manual

PENDANT - START UP
Upon "Power Up", unit will perform system check. If critical fault(s) are detected, unit will not start and fault(s) will be
displayed here (Fig.1). Warnings will not prevent the unit from starting.
The "Manual Mode" screen will display after the system check is complete and will default to "Manual Mode"
(Fig. 2). Screen displays pressure in selected units (PSI, Bar, MPa) and indicates the motor status.
PERFORMING SYSTEM
CHECK
OK
SOFTWARE VER. X.X
TORQUE WRENCH
Power Control Center
ADVANCE
ON
OFF
MENU
ENTER
••• 9 •••
FIG. 1
Power Control Center
FIG. 2 ADVANCE
ON
OFF
MENU
ENTER
www.tksimplex.com