Download Print this page

Installation; Location; Free Space Requirements; Installing The Door Handle - Kenwood K250CFW17 Installation Instructions Manual

Hide thumbs

Advertisement

installation

installation

location

When selecting a position for your unit you should make sure the floor is flat and firm and the
room is well ventilated. This unit can be used in a garage or outbuilding. For optimum energy
efficiency the unit should be located within an average room temperature of between 10°C
and 43°C. If the room temperature drops below or rises above these temperatures the energy
consumption and performance may be affected. Avoid locating your unit near a heat source, e.g.
cooker, boiler or radiator. Also avoid direct sunlight as it may increase the electrical consumption.
Do not drape the unit with any covering.

free space requirements

When installing the unit, ensure that 25 mm of
free space is left at both sides and 50 mm at the
rear of the unit. Please ensure there is adequate
space for the door to fully open.

installing the door handle

1. Insert the door handle under the control
panel.
2. Align the door handle with the screw holes,
then screw tightly.
3. Cover with the screw hole covers.
• The freezer is not a toy. Children should be supervised to ensure they do not play with
the unit.
Control
Panel
9

Hide quick links:

Advertisement

loading

  Related Manuals for Kenwood K250CFW17