Handle Installation - Windsor MERIT MP13 Operating Instructions Manual

HANDLE INSTALLATION

DECK
ASSEMBLY
The machine is shipped with handle unassembled.
Follow these steps for installation:
1. Remove handle (38291) and deck assembly
from carton.
2. Attach handle assembly to base using hardware
kit (47331) (attached to handle in a plastic bag)
items 1, 2, and 3.
2-3
HANDLE
RECEPTACLE
4
5
MERIT POLISHER 98769 09/18/00
38291
HANDLE
ASSEMBLY
6
MOTOR
PLUG
3
2
1
3. Remove bolt, nut and washers (items 4, 5 and
6) from lower block on handle assembly. Attach
links as shown. Tighten bolt and nut securely,
then back off 1/4 to 1/2 turn.
4. Check handle for movement up and down.
5. Plug motor cord into handle cord receptacle.