Table of Contents
Advertisement
HANDLE
ASSEMBLY
The machine is shipped with handle unassembled.
Follow these steps for installation:
1. Remove handle (38302) and deck assembly
(29245) from carton.
2. Remove bolt (item 3), washers (item 2), and
nut (item 1) from deck assembly (29245).
2
1
HANDLE
MOUNT BRACKET
3. Install Handle Assembly as shown.
4. Slide Bolt (item 3) thru, washers (item 2), Handle
5. Check handle for movement up and down.
6. Plug cord into handle cord receptacle.
MB2000 98883 07/20/01
HANDLE INSTALLATION
3
DECK
ASSEMBLY
Mount Brackets and Handle Assembly (38302)
as shown. Tighten bolt (item 3) and nut (item 1)
until the handle can not twist in the mount bracket
(45-50 foot pounds).
3-2
Advertisement
Table of Contents
