Main Handle - Windsor PowerTec 28 Owner's Manual

CONTROLS
Main power switch. Turns on and off
1.)
power to machine.
Brush Switch OnlOff. Green light on
2.)
indicates brushes are on.
Pump Switch On/Off. (Optional) light
3.)
"On" indicates pump is on. Should
only be run with
Vacuum Switch On/Off. Light "On"
4.)
indicates vacuum is on.
5.) Brake Switch On/Off. Indicates
brake is set. Brush won't run.
4
Drive Handle. Controls direction &
6.)
speed of machine.
'Always Ilft before movlng machlne In reverse
squeegee

7.) Main Handle.

8.) Brush Motor Circuit Breaker. Protects
brush motor from overheating.
9.) Drive Motor Circuit Breaker. Protects
drive motor from overheating.
brush motor from overheating.
11.)
12.) Squeegee Lift Lever. Raises and
lowers squeegee.
13.) Recovery Tank Clean Out Door
14.) Recovery Tank Drain Hose.
Solution Tank Drain Hose.
15.)
16.) Scrub Deck Lift Lever. Raises and
lowers scrub deck.
17.) Speed Control. Adjusts drive motor
speed
18.) Solution Control Lever. Opens and
closes solution valve.
19.) Solution Light. Blue light on indicates
solution valve is open.
Hour Meter. Continuously logs run
20.)
times.
21 .) Battery Charge Level Indicator.
POWERTEC 28134