Table of Contents
Advertisement
Chapter 5: UEFI BIOS
Station IP Address
This feature displays the Station IP address for this computer. This should be in decimal
and in dotted quad form (i.e., 192.168.10.253).
Subnet Mask
This feature displays the sub-network that this computer belongs to. The value of each
three-digit number separated by dots should not exceed 255.
Station MAC Address
This feature displays the Station MAC address for this computer. Mac addresses are 6
two-digit hexadecimal numbers.
Gateway IP Address
This feature displays the Gateway IP address for this computer. This should be in decimal
and in dotted quad form (i.e., 192.168.10.253).
VLAN
This feature is configurable if the Update IPMI LAN Configuration feature is set to Yes.
Use this feature to enable or disable the IPMI VLAN function. The options are Disable
and Enable.
*If the feature above is set to Enable, the VLAN ID feature below is available for
configuration:
VLAN ID
Use this feature to select a value for VLAN ID.
Configure IPV6 support
IPV6 Support
Use this feature to enable IPV6 support. The options are Enabled and Disabled.
Configuration Address Source
Use this feature to select the source of the IP address for this computer. If Static is selected,
you will need to know the IP address of this computer and enter it to the system manually in
the field. If DHCP is selected, the BIOS will search for a DHCP (Dynamic Host Configuration
Protocol) server in the network that is attached to and request the next available IP address
for this computer. The options are Unspecified, Static, and DHCP.
*If the feature above is set to Static, the Station IP Address/Prefix Length/IPV6 Router1
IP Address features are available for configuration:
83
Advertisement
Table of Contents
