Supermicro SuperServer E301-9D-8CN8TP User Manual page 40

SuperServer E301-9D-8CN8TP User's Manual
SMBus to PCI-E Slots
Use jumpers JI2C1 and JI2C2 to enable PCI-E SMB (System Management Bus) support to
improve system management for the onboard PCI-E slot.
Mini-SAS HDD NVMe/SATA Mode Select
Use jumper JNS1 to select the Mini-SAS hard disk drive mode as either NVMe or SATA.
USB Wake Up
Use the JPUSB1 jumper to enable system wake up via a USB device. This jumper allows you
to wake up the system by pressing a key on the USB keyboard or by clicking the USB mouse.
Enable the jumper to activate this function. When the USB Wake Up function is enabled, it
will be active on all USB ports.
SMBus to PCI-E Slots
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled
Pins 2-3 Disabled (Default)
Mini-SAS HDD NVMe/SATA Mode Select
Jumper Settings
Jumper Setting Definition
Pins 1-2 SATA (Default)
Pins 2-3 NVMe
USB Wake Up
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled (Default)
Pins 2-3 Disabled
40