Table of Contents
Advertisement
Safety Information
The 9F315-02 uses Class 1 Laser transceivers. Read the following safety
information before installing or operating these adapters.
The Class 1 laser transceivers use an optical feedback loop to maintain Class 1 operation
limits. This control loop eliminates the need for maintenance checks or adjustments. The
output is factory set, and does not allow any user adjustment. Class 1 Laser transceivers
comply with the following safety standards:
•
21 CFR 1040.10 and 1040.11 U.S. Department of Health and
Human Services (FDA).
•
IEC Publication 825 (International Electrotechnical Commission).
•
CENELEC EN 60825 (European Committee for Electrotechnical
Standardization).
When operating within their performance limitations, laser transceiver output meets the
Class 1 accessible emission limit of all three standards. Class 1 levels of laser radiation are not
considered hazardous.
CLASS 1 LASER TRANSCEIVERS
The 9F315-02 is a Class 1 Laser Product
CLASS 1
LASER PRODUCT
Notice
v
Advertisement
Table of Contents
Need help?
Do you have a question about the MMAC-Plus 9F310-02 and is the answer not in the manual?
Questions and answers