I-beam sliding anchor adjustable from 3.5”-14” (.09 m - .36m) (8 pages)
Summary of Contents for Werner MAX PATROL R410020
Page 1
WORK SAFE! WORK SMART! IF YOU HAVE ANY QUESTIONS ABOUT THE PROPER USE OF THE EQUIPMENT, SEE YOUR SUPERVISOR, USER INSTRUCTIONS, OR CONTACT WERNER CO. FOR MORE INFORMATION. Werner Co. Fall Protection 724-588-2000 93 Werner Rd.
Not suitable for leading edge applications. 12. Do not work on the far side of an opening, opposite the SRL anchor point. 13. Only Werner Co., or persons or entities authorized in writing by Werner Co., shall make repairs or alterations to the equipment.
Page 3
TRAINING: Do not use SRL’s without proper training from a “competent person” as defi ned by OSHA 29 CFR 1910.140(b) and 1926.32(f). 10. REPAIRS: Only Werner Co., or persons or entities authorized in writing by Werner Co., may make repairs or alterations to the equipment.
When more than one personal fall arrest system is attached to the anchorage, the strength in (A) or (B) must be multiplied by the number of personal fall arrest systems attached to the anchorage. CONNECTION REQUIREMENTS OMPATIBILITY IMITATIONS All connecting subsystems must only be coupled to compatible connectors. OSHA 29 CFR 1910.140 and 1926.502 prohibit snap hooks from being engaged to certain objects unless two requirements are met: snap hook must be a locking type and must be “designed for”...
Page 5
WARNING! Striking objects horizontally due to the pendulum effect of a swing fall may cause serious injury or death. SWING FALL HAZARD WING ALLS To minimize the possibility of a swing fall, anchor as Anchorages directly above the work area as possible. Striking objects horizontally, due to the pendulum effect, may cause serious injury.
Page 6
LEARANCE ALCULATIONS Self Retracting Lifeline Maximum Arrest Distance (per ANSI Z359.14 Class A) 2 ft. (0.6 m) 1 ft. (0.31 m) Harness Stretch Total Estimated To Worker’s Back D-Ring 5 ft. (1.5 m) Distance 10 ft . (3.0 m) Estimated Clearance Working Level Required Safety Factor...
ATERIALS The R410020 has 20 feet of 3⁄16 inch (4.8 mm) galvanized steel cable and a polymer housing. The R410030 has 30 feet of 3⁄16 inch (4.8 mm) galvanized steel cable and a polymer housing. The R410050 has 50 feet of 3⁄16 inch (4.8 mm) galvanized steel cable and a polymer housing. OPERATION EFORE WARNING!
AINTENANCE WARNING! Only Werner Co., or persons or entities authorized in writing by Werner Co., shall make repairs or alterations to the equipment. SRL’s requiring maintenance must be tagged “unusable” and removed from service. Do not use any SRL that requires maintenance.
Page 9
Suitable for horizontal use and with horizontal lifelines. Not suitable for leading edge applica ons. User repairs and altera ons are NOT permi ed. Avoid physical and environmental hazards such as thermal, machinery, and electrical and chemical sources. For proper use see supervisor, user instruc ons, or contact Werner Co. Overhead Use Applica ons...
Need help?
Do you have a question about the MAX PATROL R410020 and is the answer not in the manual?
Questions and answers