Advertisement
Quick Links
USER INSTRUCTIONS
FULL BODY HARNESS
Complies with the ANSI Z359.11-2021 standard and OSHA 29 CFR 1910 and 1926 regulations.
(This manual applies to all harnesses with model numbers starting with H0, H1, H2, H3, H4, H5 and H9, and
WARNING!
Compliant fall protection equipment must only be used as it was designed and adhere to the hierarchy of
controls as discussed in ANSI Z359.2. Users MUST read and follow all user instructions provided with the
product. Before using a fall arrest system, users must be trained in the safe use of the system, as required
by OSHA 29 CFR 1910.30 and 1926.503, or local safety regulations. Misuse or failure to heed these
warnings and instructions may result in injury or even death.
WORK SAFE! WORK SMART!
IF YOU HAVE ANY QUESTIONS ABOUT THE PROPER USE OF THE EQUIPMENT, SEE YOUR SUPERVISOR, USER
INSTRUCTIONS, OR CONTACT WERNER CO. FOR MORE INFORMATION.
harness accessories M010000 and M013000)
Advertisement
Related Manuals for Werner PROFORM F3
Summary of Contents for Werner PROFORM F3
- Page 1 OSHA 29 CFR 1910.30 and 1926.503, or local safety regulations. Misuse or failure to heed these warnings and instructions may result in injury or even death. WORK SAFE! WORK SMART! IF YOU HAVE ANY QUESTIONS ABOUT THE PROPER USE OF THE EQUIPMENT, SEE YOUR SUPERVISOR, USER INSTRUCTIONS, OR CONTACT WERNER CO. FOR MORE INFORMATION.
-
Page 2: Use Instructions And Limitations
CHEMICAL HAZARDS: Solutions containing acids, alkali, or other caustic chemicals, especially at elevated temperatures, may cause damage to the Full Body Harness. When working with such chemicals, frequent inspection of this equipment must be performed. Contact Werner Co. with any questions concerning the use of the Full Body Harness around chemical hazards. - Page 3 10. TRAINING: Do not use the Full Body Harness without proper training from a “competent person” as defi ned by OSHA 29 CFR 1910.140(b) and 1926.32(f). REPAIRS: Only Werner Co., or persons or entities authorized in writing by Werner Co., may make repairs or alterations to the equipment.
- Page 4 Attaching Belts to Harness Werner Co. Full Body Harnesses made without integrated belts have loops through which accessory belts can be attached, joining the accessory to the harness. The loops are found on the inside of the harness webbing, below the impact indicators.
-
Page 5: Connection Requirements
ELIEF ELIEF ANDLES The ProForm Full Body Harness is equipped with the Relief Cord and others are equipped with Relief Handles. Both are designed to help with the discomfort of suspension after a fall occurs. To use the Relief Cord / Relief Handles: Slide Chest strap down away from the throat, by grabbing the lanyard keeper and pulling down. - Page 6 FBH Stretch. TERNAL (Class L) – The ProForm F3 sternal attachment elements must be used as a pair. The sternal attachment may be used as an alternative fall arrest attachment in applications where the dorsal attachment is determined to be inappropriate by a competent person, and where there is no chance to fall in a direction other than feet fi rst.
-
Page 7: Maintenance And Storage
AIST – The waist, rear attachment shall be used solely for travel restraint. The waist, rear attachment element shall not be used for fall arrest. Under no circumstances is it acceptable to use the waist, rear attachment for purposes other than travel restraint. The waist, rear attachment shall only be subjected to minimal loading Class P through the waist of the user, and shall never be used to support the full weight of the user. - Page 8 User must read User Manual and understand Model / Modelo: all instructions and warnings prior to use. If the user manual is missing contact Werner Labels Co. for a replacement copy. Product must be Mark Number/Número de Mark de 2...
Need help?
Do you have a question about the PROFORM F3 and is the answer not in the manual?
Questions and answers