Würth MIG 350 SYN Translation Of The Original Operating Instructions page 6

- Do not wrap cable around your body while welding.
- Wrap MIG gun and ground cable together whenever possible.
- Keep MIG gun and ground cables on the same side of your body.
Shielding Gas Cylinders Can Explode
WARNING!
High pressure cylinders can explode if damaged, so treat them carefully.
- Never expose cylinders to high heat, sparks, open flames, mechanical shocks or arcs.
- Do not touch cylinder with MIG gun.
- Do not weld on the cylinder.
- Always secure cylinder upright to a cart or stationary object.
- Keep cylinders away from welding or electrical circuits.
- Use the proper regulators, gas hose and fittings for the specific application.
- Do not look into the valve when opening it.
- Use protective cylinder cap whenever possible.
1.5 Proper Care, Maintenance and Repair
DANGER!
- Always have power disconnected when working on internal components.
- Do not touch or handle PC board without being properly grounded with a wrist strap. Put PC board in static
proof bag to move or ship.
- Do not put hands or fingers near moving parts such as drive rolls of fan.
MIG SYN series use and care
• Do not modify the MIG 350 SYN/MIG 500 SYN series in any way. Unauthorized modification
may impair the function and/or safety and could affect the life of the equipment. There are specific
applications for which the MIG 350 SYN/MIG 500 SYN series was designed.
• Always check of damaged or worn out parts before using the MIG 350 SYN/MIG 500
SYN series. Broken parts will affect the MIG 350 SYN/MIG 500 SYN series operation. Replace or
repair damaged or worn parts immediately.
• Store idle MIG 350 SYN/MIG 500 SYN series. When MIG 350 SYN/MIG 500 SYN series
is not in use, store it in a secure place out of the reach of children. Inspect it for good working condition
prior to storage and before re-use.
6