Getting To Know Your Machine; Saw Blade Head Assembly; Electrical Box; Machine Base - Baileigh Industrial CS-350EU Operator's Manual

GETTING TO KNOW YOUR MACHINE

Saw Blade Head Assembly

The section of the machine composed of the saw
motor, gear case, blade and blade guard, and feed
handle and trigger switch.
Feed Handle
A long angled tube with a grip for raising and lowering
the disk head and a trigger switch to start and stop the
saw motor.
Gear Case
The central part of the assembly, housing the gear
system. The motor mounts to the back and the output
to the blade is to the left side.
Blade Guard
The blade guard has a stationary cover which mounts
to the left side of the gear case and a movable part
which has linkage connect to it to cause the guard to
open and expose the lower part of the blade as the
feed handle is pulled downward.
Saw Blade
The saw blade is mounted onto the end of the arbor
shaft and positioned to be centered within the guard
assembly.

Electrical Box

The electrical box is mounted to the right of the saw blade head assembly and house the
electrical control system except for the trigger switch. The function of the switches will be
discussed later.

Machine Base

A heavy cast iron structure that supports the miter system, vise system, and head assembly.
15
15