Mounting Procedures - RADEMACHER Troll Comfort Mounting And Operating Instruction
Tube motor control
Source: rademacher.de
Hide thumbs
Also See for Troll Comfort:
Table of Contents
Advertisement
Mounting Procedurs
RADEMACHER
Put power supply in an idle condition.
Electrical connection (if not already executed).
Push installation housing into the flush box and
tighten with the corresponding screws.
Put the covering frame on.
If available, insert the light sensor plug into the
bottom side of the Troll and press the sensor cable
carefully into the cable guiding.
( A later mounting of the light sensor is also possible )
Insert the Troll carefully.
Switch on power supply.
22
Advertisement
Table of Contents
