Operating Instructions - Beef Eater 1500 Series Assembly And Operating Instructions Manual

OPERATING INSTRUCTIONS

Control functions
Before lighting the barbecue:
• Check that all hoses and gas fittings are tight
• Open the roasting hood
• Check all control knobs are in the 'OFF' position
• Ensure that the cooking surfaces are clean
• Turn the gas isolation valve 'ON'
OFF IGNITE
18
OPERATING INSTRUCTIONS
HIGH LOW
Lighting instructions
• Do not attempt to light burners with the cooking surfaces
covered
• Read instructions before lighting
• To light a burner, depress the knob and rotate to
The starter mechanism will click and the burner
will light
• If burner did not light, depress knob and turn back to
the 'OFF' position
• Allow several minutes for gas to disperse then repeat
lighting procedure
• Once ignited, the knob can then be turned to the
desired heat setting. The knob does not need to be
pushed in while selecting the heat setting
.