Cybersecurity Disclaimer - ABB NETA-21 Setup Instructions

Cybersecurity disclaimer

This product is designed to be connected to and to communicate information and data via
a network interface. It is Customer's sole responsibility to provide and continuously ensure
a secure connection between the product and Customer network or any other network (as
the case may be). Customer shall establish and maintain any appropriate measures (such
as but not limited to the installation of firewalls, application of authentication measures,
encryption of data, installation of anti-virus programs, etc) to protect the product, the
network, its system and the interface against any kind of security breaches, unauthorized
access, interference, intrusion, leakage and/or theft of data or information. ABB and its
affiliates are not liable for damages and/or losses related to such security breaches, any
unauthorized access, interference, intrusion, leakage and/or theft of data or information.
Pre-requisite training for ABB commissioning engineers:
•
SDIP151E - CYBER SECURITY - WORKING WITH CUSTOMER SYSTEMS - for
non-ABB commissioning engineers, check separately for similar applicable
cybersecurity training.
•
Commissioning engineer should be also familiar with the cybersecurity guidelines
regarding NETA-21 installation and networks services hardening. See Technical Guide
Cybersecurity for ABB Drives (3AXD10000492137 [English])
digital services for drives - Cloud cybersecurity (9AKK106930A8297 [English]).
•
ABB engineers supporting customers with cybersecurity questions can refer to
cybersecurity FAQ internal document Cybersecurity for ABB Ability digital services
FAQ (3AXD50000530472 [English]).
Introduction to the manual 13
and
ABB Ability(TM)