Table of Contents
Advertisement
5. Reference
-. Utilizing USB (Universal Serial Bus)
This monitor provides a hub which supports the USB standard. When connecting to a USB compliant
PC or another hub, the monitor functions as a hub to which the USB compliant peripherals can be
easily connected.
Required system environment
• PC equipped with USB ports or another USB hub connected to the USB compliant PC
• Windows 2000/XP/Vista // Mac OS 9.2.2/Mac OS X 10.2 or later
• USB Cable (MD-C93, enclosed)
Note
• The USB hub function may not work properly depending on the PC or peripherals. Please consult
the manufacturer of each device about the USB support.
• Using the USB Rev. 2.0 compatible PC or peripherals is recommended.
• Devices connected to the USB port (upstream and downstream) work when the monitor is in power
saving mode or when the power button of the monitor is Off. Therefore, power consumption of the
monitor varies with connected devices even in the power saving mode.
• When the main power switch is Off, device connected to the USB port will not operate.
• The followings are procedures for the Windows 2000/XP/Vista and Mac OS.
Connecting to the USB HUB
1
Connect the monitor to the PC with the signal cable first, then turn on the
PC.
2
Connect the upstream port of the monitor to the downstream port of the
USBcompliant PC or another hub by using the USB cable.
After connecting the USB cable, the USB function can be set up automatically.
3
After setting up, the monitor's USB hub is available for connecting USB
compliantperipherals to the downstream ports of the monitor
0
Upstream
Downstream
Advertisement
Table of Contents
