Table of Contents
Advertisement
3
Perform the auto size adjustment again with the analog screen adjustment
pattern displayed.
1. Display Pattern 1 in full screen on the monitor using the "Screen Adjustment Utility" or the
screen adjustment pattern files.
2. From the <Screen> menu on the Adjustment menu, select <Auto Adjustment>.
3. Select "Execute"
The Auto Adjustment function begins (showing a running status icon) to adjust flickering,
screen position, and screen size automatically.
4
Adjust by using <Screen> menu in the Adjustment menu
(1)Vertical bars appear on the screen
Use the <Clock> adjustment.
Select the <Clock> and eliminate the vertical bars by using
Do not continuously press the Control buttons, as the adjustment value will change quickly
and make it difficult to locate the most suitable adjustment point. If the horizontal flickering,
blur or bars appear, proceed to <Phase> adjustment as follows.
(2) Horizontal flickering, blurring or bars appear on the screen.
Use the <Phase> adjustment.
Select the <Phase> and eliminate the horizontal flickering, blurring or bars by using
buttons.
Note
• Horizontal bars may not completely disappear from the screen depending on the PC.
Clock> adjustment.
Phase> adjustment.
2. Adjusting Screen
and
of the Control buttons.
and
1
Advertisement
Table of Contents
