Table of Contents
Advertisement
-. Adjusting Color
Simple Adjustment (Switching Color Mode)
Changing the color mode enables you to set the monitor to the appropriate display mode.
Selecting Color Mode
Pressing
displays the Color Mode menu at the bottom left of the screen. Each press of
through 7 modes.
Press
to exit the menu.
Tips
• The Adjustment menu and the Color Mode menu cannot be displayed at the same time.
Enter button
DVI/
SDI
MODE
ENTER
D-SUB
Mode button
Color Mode
Selectable Color modes are as follows.
Mode
Custom
Available for the color settings according to your preference.
sRGB
Suitable for color matching with sRGB compatible peripherals.
Suitable for reproducing the color gamut and gamma as set forth by EBU (European Broad-
EBU
casting Union) standards.
Suitable for reproducing the color gamut and gamma as set forth by the ITU-R Rec. 709
Rec0
standard.
SMPTE-C
Suitable for reproducing the color gamut and gamma as set forth by SMPTE-C standards.
DCI
Suitable for reproducing the color gamut and gamma as set forth by DCI standards.
CAL
Displays the screen adjusted by calibration software.
Color Adjustment of the Mode Settings
<Black Level>, <Brightness>, <Temperature> and <Gamma> settings can be adjusted on the Color
Mode menu. Select the desired function icon with
(Setting(s) of <Temperature> and/or <Gamma> is defined as standard default in some modes.)
Note
• "CAL" mode can be adjusted only by Calibration Software "ColorNavigator".
->Custom->sRGB->EBU->Rec709->SMPTE-C->DCI->CAL
Power button
SCAN
SIGNAL
SCREEN
INFO
TYPE
FORMAT
SIZE
Control buttons
Color Mode Menu
[EX.]Custom
Settings status of Black
Level, Brightness, Tem-
perature and Gamma
Purpose
and adjust with
2. Adjusting Screen
changes
Current Mode
Control buttons.
1
Advertisement
Table of Contents
