Table of Contents
Advertisement
Adjustment Contents
Menu
Black Level
Brightness
Temperature
Gamma
Saturation
Hue
Gain
Reset
Function Descriptions
To adjust the black level as desired
To set the brightness of the screen
Tips
• The values shown in the "%" are available only as reference.
To set the color temperature
Tips
• The values shown in the Kelvin are available only as a reference tool.
• While color temperature is adjusted, <Gain> is adjusted automatically according to the
color temperature.
• If the temperature is set below 5000 K or over 10000 K, the setting of <Temperature>
is turned "Off".
• If <Gain> is set, the setting of <Temperature> is turned "Off".
To set the gamma value
Tips
• If setting the gamma value, the using the monitor in the digital signal input is
recommended. If using the monitor in the analog input signal, set the gamma value
from 1.8 to 2.2.
To change the saturation
Note
• This function does not enable to display every color gradation.
To change the flesh color, etc.
Note
• This function does not enable to display every color gradation.
To change each color
(red, green and blue)
Tips
• The values shown in the "%" are available only as reference.
• The <Temperature> setting invalidates this setting. The <Gain> setting varies with
color temperature.
Note
• This function does not enable to display every color gradation.
To return the color settings to the
default settings
2. Adjusting Screen
Adjustable range
0 - 32
0~100%
5000K~10000K
in 500 K increments (including 5400K and
9300 K)
1.6 - 2.7
-100~100
Setting the minimum level (-100) turns the
image to the monochrome.
-100~100
0~100%
By adjusting the red, green and blue color
tones for each mode, custom colors can be
defined. Display a white or gray background
image and adjust the <Gain>.
Select the <Reset>.
1
Advertisement
Table of Contents
