Table of Contents
Advertisement
Allusion Series:
Model(s):
SF-ALL40-BK
SF-ALL48-BK
SF-ALL60-BK
SF-ALL84-BK
• Important operating
a n d m a i n t e n a n c e
instructions included.
Congratulations!
Congratulations on selecting a SimpliFire Electric Fireplace, an elegant and clean alternative to wood & gas burning fireplaces.
The SimpliFire electric fireplace you have selected is designed to provide the utmost in safety, reliability, and efficiency.
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE, OR MAINTAIN
THIS PRODUCT.
PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE
TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR
PROPERTY DAMAGE.
WARNING: To reduce risk of fire, electrical shock, or personal injury, read all instructions
before using appliance.
SimpliFire • SF-ALL40-BK, SF-ALL48-BK, SF-ALL60-BK, SF-ALL84-BK • 2040-981 Rev. M • 7/21
NOTICE
DO NOT DISCARD THIS MANUAL
• Read, understand and follow
these instructions for safe
installation and operation.
SimpliFire, a brand of Hearth & Home Technologies
7571 215
Street West, Lakeville, MN 55044
th
www.hearthnhome.com
Printed in China - Copyright 2021
Owner's Manual
Installation and Operation
• Leave this manual with
party responsible for use
and operation.
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SimpliFire Allusion Series
Summary of Contents for SimpliFire Allusion Series
- Page 1 Congratulations! Congratulations on selecting a SimpliFire Electric Fireplace, an elegant and clean alternative to wood & gas burning fireplaces. The SimpliFire electric fireplace you have selected is designed to provide the utmost in safety, reliability, and efficiency. READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE, OR MAINTAIN THIS PRODUCT.
-
Page 2: Important Instructions
Return appliance to authorized service facility for examination, electrical or mechanical adjustment or repair. • Do not use outdoors. SAVE THESE INSTRUCTIONS SimpliFire • SF-ALL40-BK, SF-ALL48-BK, SF-ALL60-BK, SF-ALL84-BK • 2040-981 Rev. M • 7/21... -
Page 3: Table Of Contents
C. Servicing........20 D. SimpliFire Troubleshooting Guide ....21 E. -
Page 4: Warranty
Firebox and heat exchanger, FlexBurn® System Limited 3 years Lifetime (engine, inner cover, access cover and fireback) None 1 Year All purchased replacement parts Page 1 of 2 4021-645L 10/20 SimpliFire • SF-ALL40-BK, SF-ALL48-BK, SF-ALL60-BK, SF-ALL84-BK • 2040-981 Rev. M • 7/21... - Page 5 EXPRESSED WARRANTY SPECIFIED ABOVE FOR THE APPLICABLE PRODUCT. Some States do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Page 2 of 2 4021-645L 10/20 SimpliFire • SF-ALL40-BK, SF-ALL48-BK, SF-ALL60-BK, SF-ALL84-BK • 2040-981 Rev. M • 7/21...
-
Page 6: General Information
We recommend that you record the following pertinent information about your fireplace. Model Name: ___________________________________________ Date purchased/installed: __________________ Serial Number: __________________________________________ Location of fireplace: _____________________ Dealership purchased from: _______________________________ Dealer Phone: __________________________ Notes: _______________________________________________________________________________________ SimpliFire • SF-ALL40-BK, SF-ALL48-BK, SF-ALL60-BK, SF-ALL84-BK • 2040-981 Rev. M • 7/21... -
Page 7: Getting Started
1-1/2 in. long screws, 5/16 in. diameter pilot hole and Masonry Anchor rated minimum 150 lbs. (only applicable if installing on Power Cord Assembly hollow concrete block wall). (Only for Direct Wall Mount) SimpliFire • SF-ALL40-BK, SF-ALL48-BK, SF-ALL60-BK, SF-ALL84-BK • 2040-981 Rev. M • 7/21... -
Page 8: Appliance Dimensions
1000 1088 60-1/4 20-1/4 51-3/16 11-1/4 54-5/8 17-13/16 5-15/16 SF-ALL60-BK 1530 1300 1388 83-7/8 20-1/4 74-7/8 11-1/4 78-1/4 17-13/16 5-15/16 SF-ALL84-BK 2130 1902 1988 Figure 3.1 Appliance Dimensions SimpliFire • SF-ALL40-BK, SF-ALL48-BK, SF-ALL60-BK, SF-ALL84-BK • 2040-981 Rev. M • 7/21... -
Page 9: Location
REMOVE GLASS PANEL min. 0 in. Outside swing arc Wall of adjacent min. 0 in. doors Maximum Combustible and Non-Combustible Mantel Projections. Floor Figure 3.2 Location and Clearances Requirements SimpliFire • SF-ALL40-BK, SF-ALL48-BK, SF-ALL60-BK, SF-ALL84-BK • 2040-981 Rev. M • 7/21... -
Page 10: Installation
Adjust framing dimensions for interior sheathing (wallboard sheathing). Model Model 56-1/8 SF-ALL40-BK SF-ALL60-BK 1425 44-5/16 79-1/2 SF-ALL48-BK SF-ALL84-BK 1125 2019 Figure 4.1 Framing and Wall Finishing for Recessed Installation SimpliFire • SF-ALL40-BK, SF-ALL48-BK, SF-ALL60-BK, SF-ALL84-BK • 2040-981 Rev. M • 7/21... -
Page 11: Appliance Preparation
(4) ST4X40 screws through both the left and right brackets. See Figure 4.6. Figure 4.3 Fixing Brackets Attachment for Recessed Mounting in 2 X 6 in. Framing SimpliFire • SF-ALL40-BK, SF-ALL48-BK, SF-ALL60-BK, SF-ALL84-BK • 2040-981 Rev. M • 7/21... -
Page 12: Recessed In 2 X 4 Framed Wall
SCREWS Figure 4.6 Securing the Appliance in 2 X 6 Framing Appliance shall be supported by this framing. Figure 4.8 Securing the Appliance in 2 X 4 Framing SimpliFire • SF-ALL40-BK, SF-ALL48-BK, SF-ALL60-BK, SF-ALL84-BK • 2040-981 Rev. M • 7/21... -
Page 13: Direct Wall Mounting With Wall Mounting Bracket
NOTICE: Minimum six screw(s) and/or toggle bolt an- chors are required for wall mounting the SF-ALL40-BK, SF-ALL48-BK, and SF-ALL60-BK. Minimum of eight (8) screw(s) and/or toggle bolt anchors are required for wall mounting the SF-ALL84-BK. SimpliFire • SF-ALL40-BK, SF-ALL48-BK, SF-ALL60-BK, SF-ALL84-BK • 2040-981 Rev. M • 7/21... - Page 14 Figure 4.14 Attaching Appliance to Bracket SimpliFire • SF-ALL40-BK, SF-ALL48-BK, SF-ALL60-BK, SF-ALL84-BK • 2040-981 Rev. M • 7/21...
-
Page 15: Electrical Connection / Installation
3. Terminate type NM-B wire to the terminal block, ensure connections are secure, and tighten the strain relief. 4. Replace terminal block cover plate and retaining screws. Wire Diagram Figure 4.15 Optional Power Cord Assembly SimpliFire • SF-ALL40-BK, SF-ALL48-BK, SF-ALL60-BK, SF-ALL84-BK • 2040-981 Rev. M • 7/21... -
Page 16: Appliance Final Setup
J-hooks on the rivnuts. See Figure 4.17. Figure 4.18 Secure Glass Front Note: Make sure the glass is fully attached to the fire- box so that the control panel can work properly. SimpliFire • SF-ALL40-BK, SF-ALL48-BK, SF-ALL60-BK, SF-ALL84-BK • 2040-981 Rev. M • 7/21... -
Page 17: Operating Instructions
See Figure 5.1. Remote Heater Vent Indication Receiver Power Button Flame Button Heater Button Ember Bed Button Control Panel Flame Figure 5.1 Manual Operating Switches SimpliFire • SF-ALL40-BK, SF-ALL48-BK, SF-ALL60-BK, SF-ALL84-BK • 2040-981 Rev. M • 7/21... -
Page 18: Operating By Remote Control
Pressing the Light button changes the ember bed colors (14 color LIGHT No indicator. themes available - 13 colors and a color rotating option), and turns it on/off. SimpliFire • SF-ALL40-BK, SF-ALL48-BK, SF-ALL60-BK, SF-ALL84-BK • 2040-981 Rev. M • 7/21... -
Page 19: Room Temperature And Thermostat Function
SimpliFire • SF-ALL40-BK, SF-ALL48-BK, SF-ALL60-BK, SF-ALL84-BK • 2040-981 Rev. M • 7/21... -
Page 20: Maintenance
WARNING! Risk of Electrical Shock! Any other servic- ing needed must be performed by an authorized service representative. Do not attempt to service the unit your- self. SimpliFire • SF-ALL40-BK, SF-ALL48-BK, SF-ALL60-BK, SF-ALL84-BK • 2040-981 Rev. M • 7/21... -
Page 21: Simplifire Troubleshooting Guide
Check wiring to ember bed LEDs. Ember bed does not light up Defective control board (PCB) Replace control board (PCB). Defective LED lights Replace ember bed LED lights. SimpliFire • SF-ALL40-BK, SF-ALL48-BK, SF-ALL60-BK, SF-ALL84-BK • 2040-981 Rev. M • 7/21... - Page 22 (when heater is off) internal components components. If sound is coming from friction with the rotisserie bracket, apply grease to contact point. SimpliFire • SF-ALL40-BK, SF-ALL48-BK, SF-ALL60-BK, SF-ALL84-BK • 2040-981 Rev. M • 7/21...
-
Page 23: Service Parts List
BRACKET-ALL48 Hanging Bracket REMOT-ELECT-ALL Remote PCB-ALLUS PCB Board Assembly PLUGIN-ALLP Power Cord Emberbed & LED Assembly, 40” LED-ALL40 Flame Fixing Brackets & Allusion Hardware Kit HDWR-ALLUS Screws 7/21 SimpliFire • SF-ALL40-BK, SF-ALL48-BK, SF-ALL60-BK, SF-ALL84-BK • 2040-981 Rev. M • 7/21... - Page 24 Glass Front, 48” BRACKET-ALL48 Hanging Bracket REMOT-ELECT-ALL Remote PCB-ALLUS PCB Board Assembly PLUGIN-ALLP Power Cord LED-ALL48 LED Assembly, 48” Fixing Brackets & Allusion Hardware Kit HDWR-ALLUS Screws 7/21 SimpliFire • SF-ALL40-BK, SF-ALL48-BK, SF-ALL60-BK, SF-ALL84-BK • 2040-981 Rev. M • 7/21...
- Page 25 Glass Front, 60” BRACKET-ALL60 Hanging Bracket Remote REMOT-ELECT-ALL PCB-ALLUS PCB Board Assembly PLUGIN-ALLP Power Cord LED-ALL60 LED Assembly, 60” Fixing Brackets & Allusion Hardware Kit HDWR-ALLUS Screws 7/21 SimpliFire • SF-ALL40-BK, SF-ALL48-BK, SF-ALL60-BK, SF-ALL84-BK • 2040-981 Rev. M • 7/21...
- Page 26 BRACKET-ALL84 Hanging Bracket REMOT-ELECT-ALL Remote PCB-ALLUS PCB Board Assembly PLUGIN-ALLP Power Cord Emberbed & LED Assembly, 84” LED-ALL84 Flame Fixing Brackets & Allusion Hardware Kit HDWR-ALLUS Screws 7/21 SimpliFire • SF-ALL40-BK, SF-ALL48-BK, SF-ALL60-BK, SF-ALL84-BK • 2040-981 Rev. M • 7/21...
-
Page 27: Contact Information
Printed in China - Copyright 2021 SimpliFire • SF-ALL40-BK, SF-ALL48-BK, SF-ALL60-BK, SF-ALL84-BK • 2040-981 Rev. M • 7/21...
Need help?
Do you have a question about the Allusion Series and is the answer not in the manual?
Questions and answers
Fireplace just stop running 2 days ago. I change the batteries in the remote,still doesn't work. First the flame stopped in January. It did run heat and it had light on the stone. The fireplace would it need a new part or is it done. I bought in Edmonton Alberta at Northern Fireplace, in 2018 August 24th SF-ALL 60-BK- Allusion 60 inch Recessed Linear Fireplace. Thank You.
If the SimpliFire SF-ALL60-BK fireplace stops operating after changing the remote batteries, a likely cause is a communication issue between the remote and the receiver. The receiver (#3 in the parts list) may need to be re-paired with the remote (#8). Replacing batteries can reset pairing settings, requiring re-synchronization.
This answer is automatically generated
Temperature adjustment-how do you lower temp?
To lower the temperature on a SimpliFire Allusion Series heater, use the remote control and press the Temperature button to adjust the heater’s response to the ambient temperature. Ensure the heater is powered on, and set the desired temperature lower than the current room temperature.
This answer is automatically generated
Can the SF-ALL48-BK be installed in a cabinet?