ETC Element How To Open page 2

5. If you have been experiencing boot issues with your console, please reseat the RAM, check internal cables for
any loose connectors, and (if necessary) dust out the inside of the console (compressed air works very well).
6. After verifying repaired console is functional, reverse these steps for re-assembly.
NOTE: The (3) larger screws go on the front edge. If the (4) small screws are not threading in, try setting the
console vertically on its side with the tough screw location on top. It may help to keep the screws loose until all
of the screws are threaded in place.
https://support.etcconnect.com/ETC/Consoles/Eos_Family/Element/How_To_Open_An_Element
Updated: Fri, 17 Sep 2021 16:18:11 GMT
Powered by
2