Operating Modes - Quectel BG96 Manual

ADC1 2
ADC0 24
RESERVED Pins
Pin Name Pin No.
11~14, 16,
25, 51, 56,
57, 63, 65,
RESERVED
66, 76~78,
83~88,
92~99
NOTES
1. "*" means under development.
1)
2. When PSM is enabled and then reboot the module, the function of PSM_IND pin will be activated.
This pin outputs a high voltage level when the module is in normal operation mode, and outputs a low
voltage level when the module enters PSM.
3. Keep all RESERVED pins and unused pins unconnected.

3.3. Operating Modes

The table below briefly summarizes the various operating modes referred in the following chapters.
Table 5: Overview of Operating Modes
Mode Details
Talk/Data
Normal
Operation
Idle
BG96_Hardware_Design
General
purpose analog
AI to digital
converter
interface
General
purpose analog
AI to digital
converter
interface
I/O Description
Reserved
Network connection is ongoing. In this mode, the power consumption is
decided by network setting and data transfer rate.
Software is active. The module has registered on network, and it is
ready to send and receive data.
LPWA Module Series
BG96 Hardware Design
Voltage range:
0.3V to 1.8V
Voltage range:
0.3V to 1.8V
DC Characteristics Comment
If unused, keep this
pin open.
If unused, keep this
pin open.
Keep these pins open.
24 / 79