Layout Guidelines - Quectel BG96 Manual

Hot start
@open sky
Accuracy
CEP-50
(GNSS)
NOTES
1. Tracking sensitivity: the lowest GNSS signal value at the antenna port on which the module can keep
on positioning for 3 minutes.
2. Reacquisition sensitivity: the lowest GNSS signal value at the antenna port on which the module can
fix position again within 3 minutes after loss of lock.
3. Cold start sensitivity: the lowest GNSS signal value at the antenna port on which the module fixes
position within 3 minutes after executing cold start command.

4.3. Layout Guidelines

The following layout guidelines should be taken into account in customers' designs.

Maximize the distance between the GNSS antenna and the main antenna.

Digital circuits such as (U)SIM card, USB interface, camera module, display connector and SD card
should be kept away from the antennas.

Use ground vias around the GNSS trace and sensitive analog signal traces to provide coplanar
isolation and protection.

Keep 50Ω characteristic impedance for the ANT_GNSS trace.
Please refer to Chapter 5 for GNSS antenna reference design and antenna installation information.
BG96_Hardware_Design
Autonomous
XTRA enabled
Autonomous
@open sky
LPWA Module Series
BG96 Hardware Design
2.7 s
1.82 s
< 2.5 m
48 / 79