Table of Contents
Advertisement
Kick Down Feature
In Automatic mode, while driving at a con-
stant speed if the accelerator pedal is
quickly pressed the AMT downshifts the
gear (if required). It ensures optimum ac-
celeration to complete overtaking in mini-
mal time.
Driving
1.
With the engine running and brake
pedal pressed, depending on your re-
quirement shift the lever on R, D or M.
Check the position engaged on the In-
strument Cluster display.
2.
Release the parking brake.
3.
Release the brake pedal and press the
accelerator pedal gently.
NOTE
Use right foot only to operate brake or
accelerator pedal.
Do not operate accelerator and brake
pedal simultaneously.
Do not use your left leg to operate the
pedals while driving AMT vehicle.
NOTE
If
displayed on the Instrument Clus-
ter display, it means 'Fault condition.
Contact a TATA MOTORS Authorized
Service Centre immediately.
STARTING AND DRIVING
Parking
AMT does not have a parking position.
The vehicle can be parked with the
gearshift lever in any position.
1.
Apply the parking brake firmly.
2.
Press the brake pedal and shift the
gearshift lever to the 'R' position on a
downhill slope, or to the Auto 'A' mode
or the 'M' position in the manual 'M'
mode on an uphill slope or flat road
and confirm the gear position by
checking the gear position indicator on
instrument cluster. Gear engagement
(R or A) can be done with ignition
ON/engine running condition only.
3.
Turn the key to 'ACC' position to switch
off the engine. Before switching off the
engine, run the engine in idle condition
for at least 30 seconds and then switch
off. This will allow the engine oil to lu-
bricate the turbocharger, till its speed
is fully reduced and also allow the unit
to cool down.
125
Advertisement
Table of Contents
