TATA Motors NEXON BSVI 2021 Owner's Manual page 118

Table of Contents

Advertisement

WARNING
Do not adjust the driver's seat while
driving. Adjusting the seat while driving
could cause the driver to lose control of
the vehicle.
Seat Backrest Angle Adjustment
To change the seat back rest angle, lean
forward slightly and pull up the lever (1).
Adjust seat backrest until it reaches de-
sired comfortable position. Make sure that
lever returns to its original position and
seat is securely latched.
NOTE
Adjust the seat backrest until your arms
are slightly angled when holding the
steering wheel.
WARNING
Do not travel in a moving vehicle with
the seat backrest in an excessively re-
clined position as this can be danger-
ous.
Seat Height Adjustment (if available)
To raise the seat, pull and continue pump-
ing the lever (2) in the upward direction
until the seat is at the desired height.
To lower the seat, pump the lever down-
ward until the seat is at desired height.
Seat Forward/rearward Adjustment
Lift lever (3) and slide the seat forwards or
to the rear. Release lever and make sure
that seat is securely latched.
NOTE
Adjust the driver seat position in such a
way that the driver will be able to oper-
ate the control pedals comfortably.
STARTING AND DRIVING
Head Restraint
Front seat
Adjust the head restraint so that it is as
close to the head as possible and the cen-
ter of the head restraint supports the back
of the head at eye level. This will reduce
the risk of injury to the head and neck in
the event of an accident or similar situa-
tion.
109

Advertisement

Table of Contents
loading

Table of Contents