Table of Contents
Advertisement
STARTING AND DRIVING
AUTOMATED MANUAL TRANSMIS-
SION (AMT) (If fitted)
Gear Shift Lever
Transmission (AMT) Gearbox offers a
choice of three driving modes:
1.
Automated mode with the gear lever in
position 'A'.
2.
Manual mode with the gear lever in po-
sition 'M'.
Starting
1.
Engage the parking brake firmly. Press
Brake pedal.
122
2.
Put the ignition 'ON'
3.
While the brake pedal is pressed, bring
the shifter lever to Neutral - 'N'. Check
'N on instrument cluster.
Crank to start the engine with the brake
pedal still pressed.
NOTE
If push button is pressed with brake
pedal is pressed and gear is in A mode,
the vehicle will not start. It will start
within 10 seconds if gear shifter is
moved from A to N with the brake pedal
continuously pressed."
Stopping
The vehicle can be stopped by depressing
the brake pedal regardless of the gear po-
sition. This is because the clutch is auto-
matically disengaged to prevent the
engine from stalling.
If the gearshift lever is in the 'A' position,
the gear will be down shifted to '1st' when
the vehicle stops. Also, if the gearshift
lever is in the 'M' position, the gear will be
down shifted to '1st' when the vehicle
stops.
NOTE
'Auto' mode will give optimum engine
Torque and Power output. Drive the ve-
hicle in 'Auto' mode to get max fuel
economy.
Exhaust fan in the engine compartment
will remain 'ON' for a short while after
IGN is switched 'OFF'.
Advertisement
Table of Contents
