• All information, illustrations and specifications contained in this manual are based on the latest product information available at the time of publication. • TATA MOTORS LIMITED reserves the right to make changes in design and specifications and/or to make additions or improvements in this product without obligation to install them on the vehicles previously sold.
Page 3
We recommend that all service and maintenance on your vehicle should be performed by an authorized TATA MOTORS DEALER / TATA MOTORS Authorised Service Centres (TASCs) to ensure that only latest methods and genuine replacement parts are used for continued reliability, safety and performance of your vehicle.
Page 4
CUSTOMER ASSISTANCE Dear Customer, You can also approach nearest TATA MOTORS dealer. A separate Dealer network address booklet is provided In our constant endeavour to provide assistance and with the Owner’s manual. complete service backup, TATA MOTORS has established an all India customer assistance centre.
CONTENTS SAFETY & SECURITY OPENING & CLOSING INSTRUMENTS & CONTROLS Important Safety Notes Cockpit Keyless Entry - E Key Operation Safety Guidelines Instrument Cluster Doors Seat Belts Instruments (Gauges) Window Glasses Child Restraint System Driver Information Display. Bonnet Child lock Tell tales (Indicators) Fuel Lid Anti-theft Device : Immobilizer...
Page 6
CONTENTS STOWAGE & FEATURES CLIMATE CONTROLS STARTING & DRIVING Glove Box Pre-driving Checks Manual HVAC Safety Checks Utility Tray & Pockets FATC - Fully Automatic Temp. Fuel Saving Tips Control Cup Holders Good Driving Practices Power Socket Running-In Period Roof Grab Handle Seat &...
Page 7
CONTENTS EMERGENCY & BREAK DOWN MAINTENANCE & SERVICING TECHNICAL INFORMATION ASSISTANCE Hazard Warning Switch Engine Compartment Fuel Specification First Aid Kit Engine Oil Level Lubricants Specification Advance Warning Triangle Brake Fluid Level Coolant Specification Tool Kit Engine Coolant Level Lubricants & Coolant Jack &...
Page 8
CONTENTS CAR CARE & VALUE ADDED WARRANTY - TERMS AND SERVICES CONDITIONS Car Care ENVIRONMENT SAFETY Washing ALPHABETICAL INDEX Waxing Polishing Interior Fabric Cleaning Paint Care Wiper Care Vehicle Parking For Long Duration Value Added Services...
IMPORTANT SAFETY NOTES & SAFETY GUIDELINES SAFETY IMPORTANT SAFETY NOTES: SAFETY GUIDELINES: factors. Take rest at regular inter- vals. Safe driving depends on: In this Owner's Manual, you will find • If your vehicle is equipped with a the following safety notes. •...
Make sure ing should be carried out using mild of an accident. TATA MOTORS that your seat is adjusted to a good soap and water only. strongly recommends that all the...
5. The belt must not be altered or modified during use and if required to be replaced, then it should be replaced, by TATA MOTORS Authorized Service Centre only. UNLATCH 1. Buckle 2.Tongue 3.Press Button...
Page 12
SAFETY SEAT BELTS womb, throughout the pregnancy. Seat Belt Anchor : Lap belt: When a safety belt is worn properly, it Pull the belt tongue to the desired is more likely that the foetus will not length. Insert it into the buckle until be hurt in a crash.
SEAT BELTS SAFETY Child Restraint System (CRS) : Selection of CRS : TATA MOTORS strongly recommends Not every child will fit in the CRS speci- the use of Child Restraint Systems fied for his or her weight group. Like- (CRS) for all children up to the age of...
Page 14
SEAT BELTS SAFETY Booster Seat : Recommended CRS position in the vehicle : TATA MOTORS recommends installation of CRS in rear seating position. Refer the table for recommended position for your vehi- cle and CRS. NOTE According to accident statistics, children are safer when restrained Installation Procedure : in a CRS that is secured in rear...
Page 15
SEAT BELTS SAFETY Instructions for vehicles fitted with airbag : For vehicles equipped with airbag, it is absolutely necessary to read all of the information concerning airbag system before transporting babies or children in a CRS on the front passenger seat. WARNING If your vehicle is equipped with a Storage Procedure for CRS :...
Page 16
SAFETY SEAT BELTS Check list 6. Do not leave any toys or other objects loose in the CRS or on the 1. Always secure children in the seat while the vehicle is in motion. vehicle in a CRS. The CRS must be suitable for the child’s height, weight and build.
SEAT BELTS & CHILD LOCK SAFETY The suitability of each passenger’s seat position for carriage of children and CHILD LOCK: fitting of child restraint system is shown in the table below. Whenever you carry children less than 12 years of age or 150 cm of height, properly use the child restraints which conform to AIS 072/ ECE R44 norm, the standard for child restraints.
- Problem with Immobilizer system contact Tata dealer to inspect the system Ignition ON Blinking Unlocked - Emergency start enabled, to avoid stranded customer - Indicates failure of immobiliser’s ‘Ignition Supply’ line. Contact a TATA MOTORS authorised Service Centre immediately.
Page 19
E-Key is required for making E-Key. Each Key is specific to the additional E-Keys. If both the E-Keys immobilizer of your vehicle. are lost contact TATA MOTORS Unlocking principle: authorised dealer. The transponder which is built into the WARNING ignition E-Key carries a unique identi- 1.
TATA MOTORS rear side or slow speed angular DO NOT PANIC as this is normal Authorized Service Centre immedi-...
Page 21
SAFETY NOTE In case of any frontal damage to your vehicle, have the SRS inspected by a TATA MOTORS authorised service outlet to ensure it is in proper working condition. Any Maintenance required to be performed on any SRS components...
2. Shift down of gear or vehicle should be driven cautiously 3. Sudden throttle release on a curve to the nearest TATA MOTORS road. Authorized Service Centre only. This causes high Engine drag on the...
DRIVING IN ADVERSE CONDITION SAFETY DRIVING IN ADVERSE CONDITION: Driving on a Rainy Day : Night Driving : • Check brakes, steering and • Dip the head lamp for oncoming Driving Through Water : windows. traffic during night driving. Your vehicle’s engine may get •...
Page 24
SAFETY DRIVING IN ADVERSE CONDITION Climbing Sharp Gradients on Descending Sharp Gradients : Loose Surfaces : • Depending on the severity of the • Start off smoothly in any suitable gradient, shift into appropriate gear. gear. Apply power smoothly so that Use engine braking judiciously there is no loss of traction by over- without over-revving the engine.
KEY LESS ENTRY - E-KEY OPERATIONS OPENING & CLOSING KEY LESS ENTRY: (if provided) outside or driver’s door knob from inside. 4. Approach Light Press and release approach button, Red LED will be flashed on the remote. To switch ‘OFF’ the approach lights, press and release the same button or it automatically turns OFF after a minute..
Page 26
OPENING & CLOSING KEY LESS ENTRY - E-KEY OPERATIONS switch ‘ON’ if the vehicle is locked 9. Anti-grab/Anti-scan coding If vehicle lock button is pressed on with the remote key and ignition is the remote key with the driver door The remote control set of this made ‘ON’...
Page 27
2. Don’t lock the vehicle by remote while sitting inside 3. Do keep the remote in safe and secure place. the vehicle. 4. In case of any problem, always contact TATA MOTORS authorized service outlet. 3. Don’t use discharged batteries in remote, as it could damage the remote.
Page 28
KEY LESS ENTRY - E-KEY OPERATIONS CHECK POINTS FOR TROUBLE SHOOTING In case of such problem try using the suggestions given below. If the problem still persist, consult the nearest dealer or authorised service centre of TATA MOTORS. PROBLEM POSSIBLE REASON...
DOOR OPENING & CLOSING OPENING & CLOSING DOOR OPENING / CLOSING : Locking / unlocking door with key: Front driver door has separate locking facility. All doors can be locked or unlocked from outside using the E-key. Locking without a key from inside: Location of door opening / locking All the doors can also be locked or lever.
OPENING & CLOSING WINDOW GLASS OPENING & CLOSING WINDOW GLASS OPENING & switch and rear doors switches cannot NOTE CLOSING : be operable. But it can only be Power windows can be operated for operated by using the switches on Power Windows (if fitted) 3 minutes in ‘IGN OFF’...
WINDOW GLASS OPENING & CLOSING OPENING & CLOSING Power window switch (On Rear Manual Window Winding : Doors): In some versions, power windows are Individual window winding switches not provided. Use window winder have been provided on the rear doors. handle manually for lowering or raising up window glasses manually.
OPENING / CLOSING BONNET OPENING /CLOSING BONNET - OPENING AND CLOSING: Opening: 1. Ensure that the vehicle is in neutral gear with the parking brake applied. 2. Pull the bonnet release lever located under the right hand corner of the dash board. The bonnet will pop up slightly.
1. Tail Gate Opening Lever 2. Fuel Flap Opening Lever TATA MOTORS Authorized Service Centre Only. The fuel lid is located on the left rear It can also be opened by using door side of the vehicle.
INSTRUMENTS & CONTROLS COCKPIT DRIVING CONTROLS 1. A.C. Air vent (Side) 2. Air Bag (PAB) - if fitted 3. A.C. Air vent (Middle) 4. Combi-switch 5. Steering Wheel 6. Instrument Cluster 7. Horn pad / Air Bag (DAB)-if fitted Steering Wheel Switches (If fitted) 9.
INSTRUMENT CLUSTER INSTRUMENTS & CONTROLS INSTRUMENT CLUSTER - VERSION-1 Tachometer Speedometer Temperature SET knob MODE knob Fuel Gauge Gauge Driver Information Display NOTE : All indicators shown may not be applicable to your vehicle.
Page 36
INSTRUMENTS & CONTROLS INSTRUMENT CLUSTER INSTRUMENT CLUSTER - VERSION-2 Tachometer Speedometer SET knob MODE knob Fuel Gauge Driver Information Display NOTE : All indicators shown may not be applicable to your vehicle.
Page 37
INSTRUMENT CLUSTER - GAUGES INSTRUMENTS & CONTROLS 1. Speedometer: 2. Tachometer : 3. Fuel Gauge: Speedometer indicates the vehicle Tachometer Indicates the engine speed in km/h. speed in thousands of revolutions per min (rpm). NOTE WARNING At every key IN and ignition ON, the •...
Page 38
‘ON’ position, this gauge gives an the engine and cool it down for sometime. approximate indication of the Contact nearest TATA MOTORS amount of fuel in the fuel tank and Authorized Service Centre immediately for it takes few seconds to stabilize rectification.
INSTRUMENT CLUSTER - DIGITAL DISPLAY INSTRUMENTS & CONTROLS Sr. No Driver Information System Image Description Odometer Indicates distance traveled by a vehicle Range : 0 to 999999 km. Resolution : 1 km The Odometer reading does not over flow to “0” when maximum value is reached, the display will freeze to maximum value 999999 km.
Page 40
Gear indicator Indicates the current gear engaged. Up or down arrow will be displayed, recommending whenever gear should be shifted to up or down. NOTE: If “F” is displayed it means ‘Fault’ condition. Contact a TATA MOTORS Authorized Service Centre.
Page 41
INSTRUMENT CLUSTER - DIGITAL DISPLAY INSTRUMENTS & CONTROLS Sr. No Driver Information System Image Description Door Ajar Applicable to XT / XTA / XEA / XMA variants All four door and tailgate are indicated independently when respective door is open Applicable to XM / XMI / XMS variants Driver door warning will be indicated when driver door is open...
Page 42
Average Fuel Economy will be If DTE is displayed as ‘---‘ , take IFE will vary frequently as per driv- displayed as ‘--.-‘ for initial 0.5 km of your vehicle to TATA MOTORS ing pattern. respective trip. Once 0.5 km distance authorized service centre.
Page 43
INSTRUMENT CLUSTER - DIGITAL DISPLAY INSTRUMENTS & CONTROLS OPERATIONS FOR DRIVER INFORMATION ON VEHICLES (VERSION-1):...
Page 44
INSTRUMENTS & CONTROLS INSTRUMENT CLUSTER - DIGITAL DISPLAY OPERATIONS FOR DRIVER INFORMATION ON VEHICLES (VERSION-2):...
Page 45
INSTRUMENT CLUSTER - DIGITAL DISPLAY INSTRUMENTS & CONTROLS Digital Clock Setting: Instrument Cluster Illumination: WARNING The Clock and Instrument Cluster Illumination settings should be done only when the vehicle is in station- ary condition for safety purpose. For Instrument Cluster illumination Digital clock appears on the DIS level settings, it is necessary to turn screen.
(Diesel) engine is cranked, it turns ‘OFF’. 2. Illuminates continuously if excess water is accumulated in the fuel filter. Contact a TATA MOTORS Authorized Service Centre to drain the water immediately to avoid serious damage to the fuel injection system.
Page 47
2.Illuminates continuously if engine oil level is less than a pre- defined minimum level. Stop the vehicle as soon as safety permits and switch off the engine. Check engine oil level and top-up if required. Contact TATA MOTORS assistance before starting the engine. Battery charging Illuminates momentarily when ignition is switched ‘ON’.
Page 48
Illuminates momentarily when ignition is switched ‘ON’. Once (If applicable) engine is cranked, it turns ‘OFF’. It will continuously illuminate when there is malfunction of airbag (SRS) system. Contact a TATA MOTORS Authorized Service Centre immediately. EPAS Amber Illuminates momentarily when ignition is switched ‘ON’. Once engine is cranked, it turns ‘OFF’.
Page 49
Refill the fuel tank as soon as possible. IMPORTANT: The warning light will start flashing if there is any fault in the fuel system. Contact a TATA MOTORS Authorized Service Centre immediately. NOTE: Driving with low fuel level condition can cause the engine...
Page 50
Illuminates momentarily when ignition is switched ‘ON’. (If applicable) Illuminates continuously when there is a fault in Automatic Manual Transmission system. Contact a TATA MOTORS authorized Service Centre immediately. Green ECO indicates Economy drive. This mode is used to achieve...
AUDIO REMINDERS INSTRUMENTS & CONTROLS AUDIO REMINDERS : Reverse Gear reminder : If Reverse Gear is engaged, audio Key In reminder : warning will alert you. This chime is While leaving your vehicle, if you applicable for both Manual and AMT forget the key inside the vehicle in transmission vehicles.
INSTRUMENTS & CONTROLS COMBI-SWITCH COMBI-SWITCH (RH STALK): position with the spring force. This Head lamp leveling rotary switch: does not require the headlamp to be turned ON. The lever will return to normal position when released. 5) Headlamp Rotary Switch : A) OFF Position: All lamps will remain Inner rotary switch on right hand stalk...
Page 53
COMBI-SWITCH INSTRUMENTS & CONTROLS COMBI-SWITCH (LH STALK): 5) Front Windshield and wipe. It will return to ‘OFF’ Washer : position as soon as released. a. Pull the lever little longer, washer Rear Wipe: fluid will be sprayed on the windshield. Turn the rotary knob Counter clockwise b.
INSTRUMENTS & CONTROLS FASCIA SWITCHES FASCIA SWITCHES: Front Fog Lamps WARNING (If fitted): Fascia switches are provided on the The rear fog lamp should only be centre console below FATC / HVAC Front Fog Lamps are turned ON if visibility is particularly control panel.
INSTRUMENTS & CONTROLS INFOTAINMENT SYSTEM INFOTAINMENT SYSTEM: (If fitted) USB/AUX Port (if fitted) : Speakers (if fitted) : Speakers and tweeters are provided on models with infotainment system. While provisions are given for music system and speakers on models with- out infotainment system.
ROOF LAMP & LUGGAGE COMPARTMENT INSTRUMENTS & CONTROLS ROOF LAMP : with dimming. This helps settling in LUGGAGE COMPARTMENT LAMP : the seat and inserting the key in the (if fitted) ignition switch. When the key is turned to the ‘IGN’ position, the lamp goes ‘OFF’...
STORAGE & FEATURES GLOVE BOX, UTILITY BOX / POCKETS & CUP HOLDER FRONT STOWAGE COMPARTMENT B) UTILITY POCKET/BOX C) CUP HOLDER A) GLOVE BOX A cup holder is provided on the centre console. The glove box is built into the dash- board, located in front of co-driver seat.
POWER SOCKET & ROOF GRAB HANDLE STORAGE & FEATURES D) POWER SOCKET E) ROOF GRAB HANDLE These are provided on all seats except driver’s seat. This helps in comfortable positioning of passengers during a journey. Roof Grab Handle (Fixed) Power Socket for front passengers Power Socket is provided on the centre console ahead of the gear shift lever.
LUGGAGE COMPARTMENT & LUGGAGE COVER STOWAGE AND FEATURES F) LUGGAGE COMPARTMENT G) LUGGAGE COVER : Luggage cover is designed only for hiding the luggage compartment. WARNING Do not place anything on luggage cover as it could obstruct driver’s rear view. Also in case of accident or sudden braking, it could cause an injury to occupants.
AIR VENTS & DISTRIBUTION CLIMATE CONTROL CLIMATE CONTROL Climate control regulates the temperature and humidity in the vehicle interior and filters undesirable substances out of the air. It also helps to keep windscreen clear for better visibility. Climate control can only be operated when the engine is running.
CLIMATE CONTROLS AIR VENTS & MANUAL HVAC AIR VENTS: MANUAL HVAC : Air flows from the center and Air vents are provided on dashboard. side air vents Air flow and its direction can be Air flows from the center, adjusted with the help of knob provided side vents and foot well vents on respective vent.
Page 63
AIR VENTS & MANUAL HVAC CLIMATE CONTROL The Blower Speed control dial turns the Recirculation mode: Switch ‘ON’ AC ON/OFF: fan ON and OFF, and controls fan (Indicator light ON): Interior speed. air is re-circulated inside the vehicle. Always use when : C.
Page 64
CLIMATE CONTROL MANUAL HVAC Recommended basic settings of the control elements of the air conditioning system for the respective operating modes: CONTROL KNOB POSITION BUTTON POSITION A. Air Flow Direction B. Blower Speed C. Air Temperature D. Air Recirculation E. AC ON / OFF FUNCTIONS Normal heating 2 or 3...
Page 65
MANUAL HVAC CLIMATE CONTROL WARNING NOTE • • Never leave children or adults who Condensation starts inside the air would normally require the conditioning unit when the air support of others alone in the conditioner is running, and is vehicle. safely discharged underneath your vehicle.
CLIMATE CONTROL FATC - FULLY AUTOMATIC TEMPERATURE CONTROL GENERAL DESCRIPTION : FATC - FULLY AUTOMATIC TEMPERATURE CONTROL FATC system controls the in-cabin Temperature of the vehicle automati- cally and provides maximum passen- ger convenience regardless of outside weather conditions. NOTE If the display flashes ‘ERR’...
Page 67
FATC - FULLY AUTOMATIC TEMPERATURE CONTROL CLIMATE CONTROLS DISPLAY UNIT: 1. BLOWER SPEED CONTROL KNOB : Also, when the display is not in climate mode then climate information FATC display is shown on main A. Rotate the knob clockwise to will be displayed on the all-time display screen.
Page 68
CLIMATE CONTROLS FATC - FULLY AUTOMATIC TEMPERATURE CONTROL 2. AC COMPRESSOR ON / OFF may be compromised during this The system will be deactivated BUTTON : operation. By pressing ECON button after 15 min of continuous text will be displayed on display. operation.
Page 69
FATC - FULLY AUTOMATIC TEMPERATURE CONTROL CLIMATE CONTROLS The system should be used with A. Press the ‘AUTO’ button. Air flows from the center recirculation air mode for faster heat B. Set the desired temperature by and side air vents up and cool down, however keeping the turning temperature control knob.
Page 70
CLIMATE CONTROLS FATC - FULLY AUTOMATIC TEMPERATURE CONTROL overridden setting is displayed. Sys- the system runs at full cooling or heat- 1. A solar sensor on top of the tem will remain in semiautomatic mode ing only. It doesn’t regulate the interior dashboard at the right hand side till ‘AUTO’...
Page 71
FATC - FULLY AUTOMATIC TEMPERATURE CONTROL CLIMATE CONTROLS E. When the interior has cooled down NOTE to a more comfortable level, close 1. Do not cover or spill any liquid windows and set the controls as on sensors. required in normal cooling, with 2.
6. All switches and lamps are work- indicate failure of clutch switch. ing. 1. Adjust your seat position. Contact a TATA MOTORS 7. All the gauges and indicators in 2. Check adjustment of all rear view authorised service centre the instrument cluster are work- mirrors.
SAFETY CHECKS STARTING & DRIVING SAFETY CHECKS Side indicators / Hazard warning First Aid Kit Ensure that all side indicators/ A first aid kit is provided in your vehicle. Windshield/wiper/windshield hazard warning lights are always in This is for use in case of minor injuries. washer working condition and they are used It should be regularly checked and...
STARTING & DRIVING FUEL SAVING TIPS FUEL SAVING TIPS : Always maintain clean air-filter: Fuel economy speeds : The amount of air supplied will reduce Your vehicle's fuel economy is mainly QUADRAJET : due to clogged air-filter, resulting in dependent on your style of driving. Gear Speed (kmph) wastage of fuel due to incomplete...
GOOD DRIVING PRACTICES STARTING & DRIVING GOOD DRIVING PRACTICES: When the vehicle leaves the roadway, Before you shift to reverse gear, bring do not steer sharply. Slow down your vehicle to a complete stop and • Gear shifting should be gradual slightly before pulling back into the depress the clutch pedal fully.
STARTING & DRIVING SEATS & SEAT ADJUSTMENTS FRONT SEAT ADJUSTMENTS: 1. Seat Recliner : seat locking by delibrate movement of your body in the seated condition in To change the seat back rest angle, forward and backward direction. lean forward slightly and pull up the recliner (upper) lever.
Page 77
SEATS & SEAT ADJUSTMENTS STARTING & DRIVING REAR SEATS : WARNING Avoid driving the vehicle with the Rear Seat (Foldable): head restraint removed as it is also Rear seats are provided with 60 / 40 a safety element. Do not attempt to split seats.
STARTING & DRIVING REAR VIEW MIRRORS REAR VIEW MIRRORS: Outer Rear View Mirror : Motorised Outer Rear View Mirrors: (If provided) Inside Rear View Mirrors (IRVM) : Outer Rear View Mirror (Manual Adjustment) Operating knob Mirror Adjustment Knob The rear view mirror is fitted on the door Your vehicle is equipped with motor- An antiglare mirror is fitted inside the from outside and can be adjusted by...
REAR VIEW MIRRORS & SUNVISORS STARTING & DRIVING Steps to operate the Rear View SUN VISORS: Two adjustable sun visors are provided Mirrors: inside the cab above the windshield to prevent sun glare. Lower the sun 1. Rotate the main switch to the left visors to protect the eyes from bright ‘dot’...
STARTING & DRIVING STEERING WHEEL ANGLE ADJUSTMENT & PREPARING TO DRIVE 3. Move the steering wheel up or down STEERING WHEEL ANGLE PREPARING TO DRIVE: to the desired position. ADJUSTMENT : • Release the parking brake. Ensure 4. Lock tilt lever by pulling it up to the the gear is in Neutral position.
STEERING LOCK CUM IGNITION SWITCH STARTING & DRIVING STEERING LOCK CUM IGNITION 3. IGN: All electricals and accessories SWITCH : are switched ON. 4. START: Press the clutch pedal fully Key of ignition switch is common for and turn the key further clockwise to door lock and steering lock .
STARTING & DRIVING GEAR LEVER & GEAR SHIFTING GEAR LEVER AND SHIFTING: Current Gear NOTE Indication: The Starter Protection System switches off the starter when it is The Driver Information display (DIS) in cranked for more than 10 secs. In the Instrument Cluster indicates the such a case, get the key back to current gear position engaged.
Page 83
GEAR LEVER & GEAR SHIFTING (AMT) STARTING & DRIVING Starting & Driving: AUTOMATED MANUAL TRANSMIS- f. Release the brake pedal and SION (AMT) GEARBOX: a. To start the engine, the gearshift accelerate. lever has to be in position ‘N’. NOTE The engine can only be started when the gearshift lever is in ‘N’position with the brake pedal firmly pressed.
STARTING & DRIVING GEAR LEVER & GEAR SHIFTING (AMT) Driving Modes: Reverse: Automatic Mode: Neutral: It engages in reverse gear only when Gear Upshift and Downshift will be vehicle is stationary and brake pedal done automatically while driving. Vehicle is in neutral gear position. This pressed.
Page 85
GEAR LEVER & SHIFTING (AMT) STARTING & DRIVING place in the order 5th Manual Mode: ‘SPORT’ mode activation will be 1st gear. displayed on instrument cluster other- Driver should select the desired gear wise ‘ECO’ mode will be displayed. by shifting lever to, In manual mode, gears are not shifted automatically unless the engine RPM It can be activated only in automatic...
Page 86
STARTING & DRIVING DRIVE MODES Parking: DRIVE MODES: (Applicable for Revotron 1.2T) : AMT does not have a parking position. The vehicle can be parked with the Three drive modes ‘ECO’, ‘CITY’ and gearshift lever in any position. ‘SPORT’are provided. These modes can be used to adjust engine charac- 1.
Page 87
DRIVE MODES STARTING & DRIVING Drive Mode Desired performance Switches Optimum engine Torque and Power output for FUEL EFFICIENT performance. CITY (default) Increased engine Torque and Power output for BALANCED performance. SPORT Max engine Torque and Power output for SPORTY performance.
STARTING & DRIVING BRAKES & BRAKING BRAKES & BRAKING: after washing or starting in very damp STOPPING THE ENGINE: or cold weather. The brake system on your vehicle is Before switching off the engine, run the an advanced dual circuit, diagonal split Severe strain on the brake system: engine in idle condition for at least 30 vacuum assisted hydraulic brake...
BRAKES & BRAKING STARTING & DRIVING Mechanical parking brake acting only VEHICLE PARKING: has dropped to zero. This will lead on the rear wheels is provided on the • to premature turbocharger bearing Park the vehicle in a safe place. vehicle.
EMERGENCY & BREAK DOWN ASSISTANCE HAZARD WARNING SWITCH HAZARD WARNING SWITCH : When the situation is under control switch off the hazard warning indicator. In case of a break-down at night, use hazard warning indicators. Try to park the vehicle on the side of the road to avoid collision with or inconvenience for others.
EMERGENCY EQUIPMENTS EMERGENCY & BREAK DOWN ASSISTANCE EMERGENCY EQUIPMENTS : ADVANCE WARNING TRIANGLE : NOTE You should be familiar with the location emergency equipments provided in the vehicle and how to use it. Check all the emergency equipments periodically and ensure that it is in proper working condition and is in its place.
EMERGENCY & BREAK DOWN ASSISTANCE EMERGENCY EQUIPMENTS TOOL KIT : JACK AND HANDLE : A tool kit is kept in luggage compart- ment at LH side. NOTE The tool kit should be properly secured after usage. A scissors jack with handle is kept inside the luggage compartment and mounted on the tail gate outer sill panel.
To remove the spare wheel, unscrew • After fitting the temporary spare and remove retaining bolt, which is pro- wheel, the tyre pressure must be vide to hold the spare wheel. Lift and checked as soon as possible.
Page 94
EMERGENCY & BREAK DOWN ASSISTANCE FLAT TYRE REPLACEMENT • Snow chains cannot be used on REMOVAL OF WHEEL CAP (if fitted): CHANGING FLAT TYRE: • Take out wheel cover (if fitted). the temporary spare wheel. • Never use more than one tempo- •...
Page 95
FLAT TYRE REPLACEMENT EMERGENCY & BREAK DOWN ASSISTANCE Front jacking point Rear jacking point NOTE • Make sure the jack is positioned firmly on a level surface and correct jacking point. • Never work under a raised vehicle that is supported only by a jack.
Page 96
EMERGENCY & BREAK DOWN ASSISTANCE FLAT TYRE REPLACEMENT Easy insertion of the regular tyre NOTE in the spare wheel compartment: • Before using the jack, please read the instructions on the sticker (For selected models with R15 provided on the jack. tyres) •...
Page 97
JUMP LEAD STARTING EMERGENCY & BREAK DOWN ASSISTANCE • Make sure that the battery • The connection of the -ve lead point JUMP LEAD STARTING : providing the jump start has the should be as far as away from the The engine with a discharged battery same rated voltage as the battery discharged battery as possible...
EMERGENCY & BREAK DOWN ASSISTANCE JUMP LEAD START Following order should be followed while connecting battery leads : 1. Positive (+) of Good battery to Positive (+) of discharged battery. 2. Negative (-) of Good battery to a solid metal patch attached to engine block OR unpainted metal (Engine) part which is away from the discharged battery on the...
TATA MOTORS the transmission. authorized dealer or a commercial • When towing with the rear wheels tow-truck service.
Page 100
EMERGENCY & BREAK DOWN ASSISTANCE TOWING THE VEHICLE Emergency towing : The towing hook is provided inside the tool bag kit which is kept in luggage area. Towing Process : • Open the tailgate and remove the towing hook from the tool bag. •...
FUSES EMERGENCY & BREAK DOWN ASSISTANCE FUSES: Checking and Replacing Fuses: NOTE Always ensure that the spare fuses If any electrical unit in your vehicle is Your vehicle has fuse boxes at three are replenished. not functioning, check the fuses first. locations.
Page 102
EMERGENCY & BREAK DOWN ASSISTANCE FUSES BATTERY MOUNTED FUSE BOX: ENGINE COMPARTMENT FUSE WARNING BOX: If Fuse box cover is removed for any Fuse Function Fuse reason, it should be refitted prop- Rating erly at its original position. PF1 STARTER MOTOR 400A Fuse Box - Engine Compartment NOTE...
Page 103
FUSES EMERGENCY & BREAK DOWN ASSISTANCE BRAKE LAMP FUSE FUNCTION FUSE RATING RELAY COIL INTERIOR F/B 2 IGNITION FRONT WIPER MOTOR GLOW PLUG COOLING FAN HIGH SPEED WASHER MOTOR EPAS TCU AMT REVERSE & BRAKE LAMP INTERIOR F/B 1 BATTERY REAR WIPER UNDER BONNET F/R BOX EMS ECU (DIESEL)
Page 104
EMERGENCY & BREAK DOWN ASSISTANCE FUSES CABIN COMPARTMENT FUSE BOX: 3. After removing rivets, slowly and carefully pull out cover from bottom Cover removal procedure: to disengage top mounting lugs. Fuse box is located inside the cover Take out cover. below steering column.
Page 105
FUSES EMERGENCY & BREAK DOWN ASSISTANCE Re-fitment procedure: 1. Align and engage the top mounting lugs with respective slots on dash board and gently press. 2. Similarly align the bottom rivet mounting holes and insert rivets and press center pin to lock. NOTE Pull the center pin of rivet before fitment...
Page 106
EMERGENCY & BREAK DOWN ASSISTANCE FUSES CABIN COMPARTMENT FUSE BOX: IMMOBILIZER / EPAS BLOWER MOTOR CDL / ACCESSORY POWER SOCKET RELAY COILS HVAC HRW / FLASHER 25A/10A IGN SUPPLY Fuse Box - Cabin Compartment FUSE FUNCTION FUSE TRANSIT / INFOTAINMENT RATING AIR BAG ACCESSORY...
Page 107
BULB SPECIFICATION EMERGENCY & BREAK DOWN ASSISTANCE BULB SPECIFICATION : Sr.No Description Rating Type Quantity HIGH BEAM 12V, 55W LOW BEAM 12V, 55W PARKING LAMP FRONT 12V, 5W TURN SIGNAL FRONT 12V, 21W PY21W FOG LAMP FRONT 12V, 19W STOP + POSITION REAR 12V, 21/5W P21/5W TURN SIGNAL REAR...
Page 108
EMERGENCY & BREAK DOWN ASSISTANCE BULB REPLACEMENT BULB REPLACEMENT : Replacing the low beam bulb explode when lit. Never touch the (halogen lamp): glass portion of the bulb with your WARNING bare hands and always wear eye • • Lift the bonnet to access the bulbs. The engine should not be running protection when handling or working when changing bulbs.
Page 110
EMERGENCY & BREAK DOWN ASSISTANCE BULB REPLACEMENT Replacing the High beam (halogen lamp): • Lift the bonnet to access the bulbs. • Remove the dust cover by simply pulling it off. (Fig. 1) • Pull the connectors from the bulb. (Fig.
Page 111
BULB REPLACEMENT EMERGENCY & BREAK DOWN ASSISTANCE Parking lamp bulb: • Lift the bonnet to access the bulb. • Remove the high beam bulb dust cover by simply pulling it off. • Pull out the bulb holder by gently pressing the side clips of the holder. •...
Page 112
EMERGENCY & BREAK DOWN ASSISTANCE BULB REPLACEMENT • Pull the connector from housing. • With the help of plastic wedge re- • Insert the new bulb (without touch- move the tail lamp assembly. ing the glass) into the bulb holder. •...
Page 113
• Mount and press the lamp in fixing dash board near the cockpit wiring harness. direction. For details of fitment please contact • Tighten all the mounting (M6) TATA MOTORS Authorized Service screws and fit the tail lamp Centre’s (TASCs) only. assembly properly.
• Park your vehicle on the edge of the road, open the TVS, who will provide breakdown assistance including bonnet and put on the hazard warning signal. towing to the nearest TATA MOTORS Authorized Workshop through their Authorized Service Providers (ASP) • Place the advance warning triangle supplied with the vehicle approx.
Page 115
• Vehicle to vehicle towing or winching & towing for non • Cases involving accident, fire, theft, vandalism, riots, accident cases up to the nearest TATA MOTORS lightening, earthquake, windstorm, hail, tsunami, authorized workshop. Towing charges at actual cost unusual weather conditions, other acts of God, flood, beyond the same to be paid to the ASP in cash.
Page 116
• Cases involving racing, rallies, vehicle testing or • *The decision for free of charge repairs will be as per practice for such events.. the warranty policy & procedures of TATA MOTORS Disclaimer LTD. and as per the interpretation of the same by ASP.
Page 117
EXCLUSION OF LIABILITIES : customer’s risk & TATA MOTORS shall not be liable • It is understood that TATA MOTORS shall be under no for any damages / claims as a result of the same. liability whatsoever in respect of any loss or •...
Page 118
MAINTENANCE & SERVICING GENERAL INFORMATION Have your vehicle serviced regularly to Use only recommended fuels, lubri- WARNING help maintain its roadworthiness and cants, fluids and service parts conform- To reduce the risk of vehicle resale value. There is a large network ing to specifications.
Engine Compartment pages. Pull it out again and examine the oil contact the nearest TATA MOTORS level. It should be between ‘MIN’ and authorized Service outlet. ‘MAX’ level. If not, top up with recom- mended engine oil.
This may void the warranty. Use recommended engine NOTE coolant meeting the TATA MOTORS In case of emergency, a large specification. amount of water without engine Do not add extra inhibitors or additives coolant may be added in order to to the coolant.
TRANAXLE OIL & WINDSHIELD WASHER FLUID LEVEL MAINTENANCE & SERVICING TRANSAXLE OIL LEVEL : WINDSHIELD WASHER FLUID LEVEL: Windshield washer fluid container is located behind the front right hand side panel and its filler neck is provided near the auxiliary tank in the engine compartment.
MAINTENANCE & SERVICING SPARK PLUG Spark Plug Replacement : SPARK PLUG (PETROL) : cable can affect combustion and cause damage to engine and 1. Remove air filter assembly to catalytic converter. access spark plug. 1. Clean up any dirt or oil that is collected around the spark plug caps.
Page 125
TYRES MAINTENANCE & SERVICING TYRES : makes it easier for you to tell if pressure Recommended Tyre Pressures loss is caused by a tyre problem and (175/65 R14) not by variation between gauges. TYRE WHEELS TYRE Keeping the tyres properly inflated SIZE PRESSURE 175/65 R 14...
Page 126
MAINTENANCE & SERVICING TYRES Tyre Pressure Sticker Location : Special care for tubeless tyres : 4. Maintain recommended inflation pressure. Over-inflation, in 1. While removing tyre from wheel rim particular, may cause puncture or and mounting it back on wheel rim, bursting of tyre.
Page 127
TYRES MAINTENANCE & SERVICING Tyre Rotation : The illustrations shows how to rotate Wheel Balancing : tyres when normal or temporary spare Wheels of your vehicle are balanced wheel is fitted. for better ride comfort and longer tyre life. Balancing needs to be done Wheel alignment : whenever tyre is removed from rim.
Page 128
MAINTENANCE & SERVICING BATTERY BATTERY : Clean the battery terminals with a shield or have a skilled technician terminal cleaning tool or wire brush. to do the battery maintenance. Check the battery for proper electrolyte Reconnect and tighten the cables, coat level.
Page 129
If red LED remote flashes for 5 times Use CR 2032 battery only. after placing and releasing any button on remote. It is recomended to replace battery at a TATA MOTORS author- ized service center. 4. Insert the new battery. You should, however, proceed as fol-...
Page 130
MAINTENANCE & SERVICING ON BOARD DIAGNOSTOC (OBD) ON BOARD DIAGNOSTIC (OBD) located on the cockpit at RHS of the SYSTEM: steering wheel. On board Diagnostics or OBD is an automotive term referring to a vehicle’s self Diagnostic and reporting capability. The OBD system allows continuous diagnosis of the components of the vehicle correlated with emissions.
Page 131
ROUTINE SERVICE MAINTENANCE & SERVICING ROUTINE SERVICE BY OWNER OF maintenanc procedure, have it done THE VEHICLE : by a TATA MOTORS Authorized Dealer / TASC. We highly recommend that the following items are to be inspected WARNING periodically. Performing maintenance work on a vehicle can be dangerous.
Page 132
VEHICLE SERVICE SERVICE INSTRUCTIONS Servicing of the vehicle can be done The TATA BOLT has been manufactured to give you economical and trouble at any TATA MOTORS Authorised free performance. To achieve this please follow the instructions as stated. Dealer Workshop, TATA MOTORS Your vehicle is entitled to three free services (labour only).
SERVICE SCHEDULE MAINTENANCE & SERVICING MAINTENANCE SCHEDULE OPERATIONS FREQUENCY GENERAL • • • • • • • • Wash the vehicle and Clean Condenser Fins EVERY Service • • • • • • • • Drain water from Fuel Filter Bowl (Diesel) EVERY Service •...
Page 134
MAINTENANCE & SERVICING SERVICE SCHEDULE MAINTENANCE SCHEDULE OPERATIONS FREQUENCY ENGINE (REVOTRON 1.2T) • • • • • • Clean air filter element (More frequently for vehicle operating in severe condition) 15,000 Replace air filter element (More frequently for vehicle operating in severe condition) •...
Page 135
SERVICE SCHEDULE MAINTENANCE & SERVICING MAINTENANCE SCHEDULE OPERATIONS FREQUENCY WHEELS & TYRES • • • • • • • Rotate tyres 15,000 FRONT & REAR SUSPENSION • • • • • • • Check and adjust Wheel Alignment and Balancing 15,000 ELECTRICAL •...
TECHNICAL INFORMATION FUEL SPECIFICATION FUEL (DIESEL) : Ambient Percentage Temperature Summer grade Supplementary Normal grade BS IV compliant diesel conforming to IS1460 upto Deg C. diesel fuel or EN 590 or equivalent is recommended to be used as fuel. Upto 0 Do not use premium diesels available in the market for 0 to -10 example extra premium / Turbojet etc.
SAE 5W/30 We strongly recommend to refill your vehicle’s engine cool- ant only at a TATA MOTORS Authorised service centre. Brand names : As per chart given in the manual. Transaxle : Use recommended brand of 80W API GL-4 gear oil (REVOTRON 1.2T) and Semi-synthetic SAE 75W80...
TECHNICAL INFORMATION LUBRICANT & COOLANT CO-BRANDING PLEASE USE FOLLOWING GENUINE FLUIDS, COOLANTS AND LUBRICANTS RECOMMENDED BY TATA MOTORS FOR OPTIMUM PERFORMANCE OF YOUR VEHICLE ITEM SPECIFICATION COMPANY AND BRAND ENGINE OIL (REVOTRON 1.2T) ACEA 5W30 A5/B5 CASTROL Magnatec Professional T 5W30 4.0 Litres...
TECHNICAL SPECIFICATION TECHNICAL INFORMATION TECHNICAL SPECIFICATION : PARAMETER BOLT DIESEL BOLT PETROL ENGINE Model 1.3L FIAT SDE 75PS REVOTRON 1.2T Type 1.3L SDE TURBO INTERCOOLED Gasoline 4-stroke turbocharged DIESEL intercooled MPFI with 2 valves per cylinder. Bore / Stroke (mm) 69.6 X 82...
Page 140
TECHNICAL INFORMATION TECHNICAL SPECIFICATION BRAKES Service Brakes Dual circuit diagonal split hydraulic Dual circuit diagonal split hydraulic brakes through tandem master cylinder brakes through tandem master cylinder Brake Drum Dia. 200mm 200mm Parking Brake Lever type console mounted cable Lever type console mounted cable operated mechanical linkages acting on operated mechanical linkages acting on rear wheels...
Page 141
TECHNICAL SPECIFICATION TECHNICAL INFORMATION MAIN CHASSIS DIMENSION (IN MM) Wheel Base 2470 2470 Track Front 1450 1450 Track Rear 1440 1440 Overall Length 3825 3825 Overall Height 1562 (15” Tyre) / 1550 (14” Tyre) 1562 (15” Tyre) / 1550 (14” Tyre) Max.
CAR CARE & WASHING CAR CARE & VALUE ADDED SERVICE CAR CARE : 3. To avoid scratches, please wear Bar) at electrical devices and soft gloves . Remove finger rings, connecter during wasing. This is to Your vehicle is subjected to many nails, wrist watch while washing.
CAR CARE & VALUE ADDED SERVICE WASHING & POLISHING INTERIOR FABRIC CLEANING TIPS: NOTE NOTE 1. Stains should treated Avoid wiping of painted surface in Do not attempt to rip or tamper the immediately. If left for a long time, dry condition as it may leave tag.
PAINT CARE & WIPER CARE CAR CARE & VALUE ADDED SERVICE PAINT CARE : PERIODIC INSPECTION : WIPER CARE : • Wiper blade attack angle on windshield FOLLOWING GUIDELINES WILL Regularly inspect your vehicle for HELP YOU TO PROTECT YOUR any damage in the paint film such glass should be 90 i.e.
CAR CARE & VALUE ADDED SERVICE VEHICLE PARKING FOR LONG DURATION VEHICLE PARKING AT ONE PLACE 7. Slightly open the windows. FOR LONG DURATION ( Non use 8. Cover the vehicle with a cloth or maintenances) : perforated plastic sheet. Do not use sheets of imperforated plastic If you want to park your vehicle at as they do not allow moisture on...
Extended Warranty Booklet & Cover Note : The Extended Warranty booklet and cover note is the basis of the contract between TATA MOTORS LIMITED and the Owner of the vehicle shown on the Extended Warranty booklet. The Customer is to retain this booklet and the same to be produced to the...
Page 150
Mechanical / Electrical break down as defined in this warranty and confirmed by the dealer within the stipulated terms and conditions. • Tata Motors dealer shall either repair or replace any part found to be defective with a new part or an equivalent at no cost to the owner for parts or labour. •...
Page 151
VALUE ADDED SERVICE CAR CARE & VALUE ADDED SERVICE Why are Corrosion Protection Waxes necessary? Corrosion is caused by: Water / salt water acid rain & atmospheric fallouts. Critical areas are: Cavities: joints, crevices, spot welds, underbody • Corrosion is the most important factor when we talk about the vehicle life. If you treat your car you can prolong the life.
Page 152
Areas covered - four doors, rear quarter panels & dicky. In case of diesel vehicles, can be used in the bonnet. TATA MOTORS has tied up with M/s Wuerth , M/s Autokrom, M/s 3M India Ltd & M/s Bardahl for these world class treatment at affordable prices.
Page 153
• Cleaning & dressing of tyres, Bumpers & all exterior plastic moldings/trims. Tata Motors has tied up with M/s Autokrom, M/s 3M & M/s Wuerth for this world class treatment at affordable prices. This treatment is available in all authorized workshops. The Dealer Service Marketing Executive will explain to you the...
Page 154
• Specialised protection for seat fabric from liquid spills. TATA MOTORS has tied up with M/s Wurth and M/s M/s Autokrom for this world class treatment at affordable prices. This treatment is available in all authorized workshops. The Dealer Service Marketing Executive will explain to you the benefits and terms and conditions of this treatment.
Page 155
VALUE ADDED SERVICE CAR CARE & VALUE ADDED SERVICE Why de-carbonisation is required in diesel engine ? Carbon deposits accumulate over time in injector pump, fuel injectors, combustion chambers& intake valves This causes rough idle, vibration at idle, loss of power, hesitation, misfire, decreased mileage, increased smoke, slowed throttle response.
Page 156
Tata Motors has tied up with M/s HOEC Bardahl India Ltd and M/s BG for these world class treatment at affordable prices. These treatments are available in all authorized workshops.
WARRANTY - TERMS & CONDITIONS We WARRANT each TATA BOLT vehicle and parts thereof any person other than from our sales or service manufactured by us to be free from defect in material and establishments, our authorized dealers, service centres...
Page 158
WARRANTY - TERMS & CONDITIONS tyre rotation, adjustment of valve clearance, fuel timing, the sale, or any agreement or to claim any reduction ignition timing and consumables like bulbs, fuel, air in the purchase price of the car, or to demand any &...
ENVIRONMENT SAFETY Switch off the engine during long stops at traffic TATA MOTORS LTD. is committed to produce vehicles jams or signals. If you need to keep the engine using environmentally sustainable technology. A number running, avoid unnecessary revving it up or stopping of features have been incorporated in Tata Motors and starting.
Page 160
Dispose the If the ‘Service’ lamp continuously glows, please used filters and batteries in compliance with the take the vehicle to a TATA MOTORS authorized current legislation. service outlet. Do not allow unauthorised person to tamper with...
Need help?
Do you have a question about the Bolt and is the answer not in the manual?
Questions and answers
Size of outer cv joint and size of front bearing