Scanning Dot Matrix Printer Paper - Xerox D70n User Manual

®
Xerox D70n Scanner
3. Load the documents face down with their tops into the Automatic Document Feeder.
4. You can now scan the documents using the scanner button, OneTouch, or one of the other
scanning interfaces.

Scanning Dot Matrix Printer Paper

®
With the Xerox D70n Scanner you can scan dot matrix printer paper without removing the
perforated sides from the page.
1. Separate the pages so that you have a stack of single pages.
Do not place a stack of connected paper in the input tray. The paper will tear when the
separation roller attempts to separate the current page from the rest of the stack. If you want
to scan a long document of dot matrix paper, try placing the document stack on the desk
behind the input tray. Close the input tray extension and place the leading page in the input
tray.
2. Slide the paper guide switch up and then adjust the paper guides.
3. Flip up the paper guides, extend the input and output trays.
4. Load the documents into the Automatic Document Feeder.
5. You can now scan the documents using the scanner buttons, OneTouch, or one of the other
scanning interfaces.
8-4
Loading Documents to Scan
User Guide