Angelo Decor Farmstead AD99002 Quick Start Manual

Farmstead Fountain AD99002
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO NOT
return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and warranty
information.
Carefully unpack and arrange The LED light and splash guard are
Locate the tubing from inside the
all parts.
pre-installed. Ensure they are fountain and attach it to the pump.
positioned as shown above.
Place the pump inside the fountain.
Note: Water flow can be adjusted
using the dial on the front of the pump.
Retrieve the light connector from inside
Attach the cord from the connector to
the fountain.The light connection
the transformer.
must sit outside the fountain.
IMPORTANT: to prevent water loss
during operation, create a drip-loop
with the light cords by dipping them
into the reservoir before they exit out
the back of the fountain.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Printed in China