Angelo Decor AD99000 Quick Start Manual

Metal Well Fountain
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO NOT
return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and warranty
information.
Carefully unpack and arrange all parts.
Go the pump cord through the
groove on the side
Pass the pump power cord through the
opening at the side, then out the rear of
the fountain.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Insert the pump into the included
PumpJacket™ foam filter as shown above.
AD99000
Locate the tubing and attach it to the
output of the pump. Place the pump
inside the fountain.
Printed in China