Angelo Decor Pump Barrel Manual

Pump Barrel Fountain
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO NOT
return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and warranty
information.
Carefully unpack and arrange all
parts.
Locate and retrieve the light connection from inside
the fountain. To prevent the risk of water loss, create
a drip loop with the cables from the lights.
Align the pump cord and light cables with the
groove. Slide the pump access door in place.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Pass the tubing
from the top part
into the body of
the fountain.
Align and lower
the top part on to
the fountain.
The light connection
should remain
outside the fountain.
Securely attach the
cable from the light
connection to the
transformer.
Locate the tubing and
attach it to the pump.
Flow can be adjusted
using the control dial
on the front of the
pump.
AD99010
Place the pump with
tubing attached inside
the fountain body.
Printed in China