Angelo Decor River Rock AD97699 Quick Start Manual

River Rock Fountain
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO NOT
return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and warranty
information.
Carefully unpack and arrange all
parts.
Take the tubing and attach it to the
pump.
Water flow can be adjusted using the
dial located on the front of the pump.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Retrieve the tubing, light connection
and cable from inside the fountain.
The light connection should remain
outside the fountain at all times.
Align the cords and install the pump
access door. Turn to lock in place.
Any excess cord can be pushed
inside as desired.
AD97699
Securely attach the light cable to the
transformer.
To prevent the risk of water loss,
create a drip-loop with the light cord
inside the fountain.
Printed in China