Omron CS1G-CPU42H Replacement Manual From C200H To Cs page 33

< Transistor Output Units >
C200H-series Unit
C200H-OD219
4.5 to 26.3 VDC, 0.1 A, Sinking,
Connector, 64 outputs
(Group-2)
< TTL Output Unit >
C200H-series Unit
C200H-OD501
5 VDC, 35 mA, Connector,
32 outputs (Special I/O)
< Triac Output Units >
C200H-series Unit
C200H-OA223
250 VAC, 1.2 A, Terminal block,
8 outputs
C200H-OA221
250 VAC, 1.2 A, Terminal block,
8 outputs
C200H-OA224
250 VAC, 0.5 A, Terminal block,
12 outputs
C200H-OA222V
250 VAC, 0.3 A, Terminal block,
12 outputs (CE marked)
24
Corresponding CS-series Unit
CS1W-OD261
12 to 24 VDC, 0.3 A, Sinking,
Connector, 64 outputs
Corresponding CS-series Unit
No replacement model
Corresponding CS-series Unit
CS1W-OA201
250 VAC, 1.2 A, Terminal block,
8 outputs
CS1W-OA201
250 VAC, 1.2 A, Terminal block,
8 outputs
CS1W-OA211
250 VAC, 0.5 A, Terminal block,
16 outputs
CS1W-OA211
250 VAC, 0.5 A, Terminal block,
16 outputs
Description
Transistor Output Unit with
connector for 64 outputs..
Description
TTL Output Unit with connector for 32 outputs. The CS Series does not have the
same type of Unit.
Use C200H-OD501 with CS1 or use the CS1W-OD231 Transistor Output Unit or
CS1W-MD561 TTL I/O Unit instead.
Description
Triac Output Unit with
terminal block for 8 outputs.
Triac Output Unit with
terminal block for 8 outputs.
Triac Output Unit with
terminal block for 12 outputs.
Replace this unit with a Triac
Output Unit with 16 outputs.
Triac Output Unit with
terminal block for 12 outputs.
Replace this unit with a Triac
Output Unit with 16 outputs.
Difference
1) No. of circuits (32 points/common x 2 circuits
→ 16 points/common x 4 circuits)
2) Output circuit specifications
Output voltage range
(5 to 24 VDC → 12 to 24 VDC)
Residual voltage (0.8 V → 1.5 V)
ON response time (0.1 ms → 0.5 ms)
OFF response time (0.4 ms → 1.0 ms)
3) Internal current consumption
(5 VDC: 270 mA → 390 mA)
Difference
Difference
1) Terminal block
2) Output circuit specification
Max. inrush current (15 A: Pulse width 100 ms,
30 A: Pulse width 10 ms → 10 A: Pulse width
100 ms, 20 A: Pulse width 10 ms)
3) Internal current consumption
(5 VDC: 180 mA → 230 mA)
1) Terminal block
2) Output circuit specifications
Max. inrush current (No regulation → 10 A:
Pulse width 100 ms, 20 A: Pulse width 10 ms)
Residual voltage (1.2 VAC →
50 to 1200 mA: 1.5 VAC, 10 to 50 mA: 5 VAC)
OFF response time (1/2 of load frequency or
less → 1/2 of load frequency + 1 ms or less)
3) Internal current consumption
(5 VDC: 140 mA → 230 mA)
1) Terminal block
2) Output points (12 points → 16 points)
3) No. of circuits (12 points/common x 1 circuit
→ 8 points/common x 2 circuits)
4) Output circuit specifications
Max. switching capacity
(250 VAC 0.5 A/point, 2 A/Unit
→ 0.5 A/point, 2 A/common, 4 A/Unit)
Max. inrush current
(10A: Pulse width 100 ms, 20A: Pulse width
10 ms → 15A: Pulse width 10 ms)
Min. switching capacity
(10 VAC: 100 mA, 24 VAC: 50 mA, 100 VAC:
10 mA →75 VAC: 50 mA)
Residual voltage (50 to 500 mA: 1.5 VAC,
10 to 50 mA: 5 VAC → 1.6 VAC
5) Internal current consumption
(5 VDC: 270 mA → 406 mA)
1) Terminal block
2) Output points (12 points → 16 points)
3) No. of circuits (12 points/common x 1 circuit
→ 8 points/common x 2 circuits)
4) Output circuit specifications
Max. inrush current
(No regulation → 15 A: Pulse width 10 ms)
Min. switching capacity (10 VAC: 10 mA
(resistive load)/40 mA (inductive load)
→ 75 VAC: 50 mA)
Residual voltage (1.2 VAC → 1.6 VAC)
ON response time
(1/2 of load frequency or less → 1 ms or less)
OFF response time (1/2 of load frequency or
less → 1/2 of load frequency + 1 ms or less)
5) Internal current consumption
(5 VDC: 200 mA → 406 mA)