Omron CS1G-CPU42H Replacement Manual From C200H To Cs page 15

XW2Z-S011
CS1W-OD231 C200H-OD215
Reused cable
Rated voltage 5 to 24 VDC
16 mA/4.5 VDC to
100 mA/26.4 VDC
Max. switching capacity
0.8 A/common,
3.2 A/Unit
Leakage current 0.1 mA max.
Residual voltage 0.7 V max.
ON response time 0.2 ms max.
OFF response time 0.6 ms max.
8 points/common x
No. of circuits
4 circuits (32 outputs)
Fuses 4 (1 fuse/common)
5 to 24 VDC±10%,
90 mA min.
External power supply
2.8 mA x no. of ON outputs
Dynamic outputs 30 mA min.
6
C200H-OD215
12 to 24 VDC
0.5 A/point,
2.5 A/common, 5 A/Unit
0.1 mA max.
1.5 V max.
0.5 ms max.
1 ms max.
16 points/common x
2 circuits (32 outputs)
None
10.2 to 26.4 VDC
Not supported
CS1W-OD231
Use CS1W-MD561 when using 5 VDC.
Make sure that the connected device operates
correctly.
Make sure that the connected device operates
correctly.
Make sure that the connected device operates
correctly.
The number of circuits decreased from 4 to 2.
Rewire if separate power supplies are used.
When protection is required, connect a protective
device externally.
Dynamic outputs are not supported.
* CN1 COM0 and COM1 and
CN2 COM2 and COM3 are
internally connected in the
CS1-series Unit. When
separate power supplies were
used, rewire to use one
common power supply.
Remarks