Angelo Decor AD94002 Quick Start Manual

Bear with Cubs Fountain
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO NOT
return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and warranty
information.
Carefully unpack and arrange all
parts.
Place the pump inside the fountain.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Retrieve the tubing and light
connection. The light connection
must sit outside the fountain.
IMPORTANT: to prevent water loss
during operation, create a drip-loop
with the light cables by dipping them
into the reservoir before they the
fountain.
Securely attach the cable from the
light connection to the transformer.
AD94002
Attach the tubing to the pump.
Water flow can be adjusted using the
control on the front of the pump.
Printed in China