Specifications - Zaxcom ZMT270 User Manual

Zaxcom ZMT3-HH

Specifications

Transmitter
Power output: 25 / 50 / 75 mW – Firmware Selectable
RF Modulation: Proprietary Digital Method
RF Frequency Range: ZMT3-HH.5: 512 - 614 MHz
Antenna Connector: 50 Ω SSMA Female
Emission Designator: 180 KV2E
FCC Part: 75.861
Audio
A-D Dynamic Range: 114dB
Audio Input: Balanced
Mic input Impedance: 12V Phantom > 1000 Ohms
Analog distortion: 0.002%
Frequency Response: Mode 0: 20 Hz to 16 kHz / T & M Mode 0.2 Hz to 16 kHz
Mic Power (User Selectable): 12V Phantom, 24V Phantom, 36V Phantom, 48V Phantom
Mic Connector: 3-Pin Micro LEMO
ADC Bit-Depth: 24 Bits
Time code Reader/Generator
Clock Accuracy: 1.54PPM (1 Frame Out in 6 Hours)
Time code Type: SMPTE
Time code Frame Rates: 23.98, 24, 25, 29.97NDF, 29.97DF, 30NDF, 30DF
Recording
Media: Micro SD Card (Flash Memory)
File Format: .ZAX convertible to BWAV, MP3
Recording Time: Up to 216 Hours (16 GB card)
2.4 GHz ZaxNet Receiver
RF Frequency Range: 2.403 to 2.475 GHz
RF Modulation: Digital Spread Spectrum
RF Frequency Step: 0.001 GHz (1 MHz)
RF Bandwidth: 1 MHz
Channel Separation: 2 MHz
Sensitivity: -96 dBm
Physical
Weight: 3.1 ounces (88 grams) with battery
Battery Type: NP-50
Dimensions (H x W x D): 3.4 X 1.6 X .55 inches (86.4 X 40.6 X 14 mm)
Display: Graphic OLED
Runtime: Up to 5 Hours (depending on the microphone used)
All Specifications are subject to change without notice.
ZMT3-HH.6: 596 -698 MHz
48V Phantom > 2000 Ohms
27
Specifications