Specifications - Zaxcom ZMT4-X User Manual

Zaxcom ZMT3 Flex

Specifications

Transmitter
Power output: 25 / 50 mW – Firmware Selectable
RF Modulation: Proprietary Digital Method
RF Frequency Step: 100 KHz
RF Bandwith in ZHD48 Mode: 100 KHz
RF Bandwith in ZHD96 Mode: 200 KHz
RF Bandwith in XR Mode: 400 KHz
RF Frequency Range: ZMT3.5 Flex: 512 - 614 MHz
Antenna Connector: 50 Ω SSMA Female
Emission Designator: 180 KV2E, 100 KV2E, 50 KV2E
FCC Part: 74.861
Audio
Dynamic Range - Mono: 128dB Stereo: 108dB
Mic input Impedance: 6.8 k Ohms
Distortion: 0.002%
Frequency Response: Mode 0: 20 Hz to 16 kHz
Microphone Power 3.3V
Mic Connector: Microdot X 2
Input Range: -60 to -30 dBu
ADC Bit-Depth: 24 Bits
ADC Sampling Rate: 48kHz
Time code Reader/Generator
Clock Accuracy: 1.54PPM (1 Frame Out in 6 Hours)
Time code Type: SMPTE
Time code Frame Rates: 23.98, 24, 25, 29.97NDF, 29.97DF, 30NDF, 30DF
Recording
Media: Micro SD Card (Flash Memory)
File Format: .ZAX convertible to BWAV, MP3
Recording Time: Up to 216 Hours (16 GB card)
2.4 GHz ZaxNet Receiver
RF Frequency Range: 2.403 to 2.475 GHz
RF Modulation: Digital Spread Spectrum
RF Frequency Step: 0.001 GHz (1 MHz)
RF Bandwidth: 1 MHz
Channel Separation: 2 MHz
Sensitivity: -96 dBm
All Specifications are subject to change without notice.
ZMT3.6 Flex: 596 -698 MHz
27
Specifications