Manage Services Settings; Dns Network Services - Honeywell PC300T User Manual

Setting
Bluetooth

Manage Services Settings

This section lists the system services you can manage from the printer. You will
only see Manage Services from the menus if you have an Ethernet module
installed in the printer. To view these services:
•
•
Setting
Web Server
FTP
Net1
LPR
Telnet
SSH
XML
Time Server
Device
Management
Connectivity
Agent

DNS Network Services

This section describes the DNS settings for the printer. To view these settings:
•
PC300T/PC310T Desktop Printer User Guide
Description
Determines if the printer is allowed to
communicate using Bluetooth. Supported only if
the optional Bluetooth module is installed.
From the printer web page, click Configure > System Settings > Manage
Services.
From PrintSet 5, click Configuration > System Settings > Manage Services.
Description
Determines if the web server is enabled in the
printer.
Determines if the printer can use FTP (File
Transfer Protocol).
Determines if the printer can use Telnet to
communicate with Direct Protocol (Fingerprint).
Determines if the printer can use the LPR (Line
Printer Server) daemon.
Determines if the printer can use Telnet to
communicate with another device.
Determines if the printer can use Secure Socket
Handling (SSH).
Determines if the printer can use XML printing.
Determines if the printer uses the Network Time
Protocol (NTP) to synchronize its time with a
network time server. The default Server Address is
ntp0.cornell.edu, and the default Port Number
is 123.
Determines if the printer can use 9300 TCP/IP
port to communicate with HCD.
Determines if the printer can communicate with
Honeywell Cloud on port 10000.
From the printer web page, click Configure > Network Settings > DNS.
Default
Enable
Default
Enable
Disable
Enable
Enable
Disable
Disable
Enable
Disable
Enable
Disable
49