Table of Contents
Advertisement
Pressure Regulator and Hose Assembly
The pressure regulator has an outlet pressure of not more than eleven inches water column. It must be connected to the Propane
gas cylinder's female valve outlet before the grill can be operated.
O
perating a Propane gas grill without the pressure regulator and hose assembly will cause gas leaks which could lead
to fire or explosion, resulting in property damage or personal injury.
Inspect the threaded outlet on the tank and the threaded inlet on the grill's pressure regulator for dirt, nicks, or corrosion that might
interfere with a gas-tight connection. If the tank outlet shows damage, return the tank to the supplier for a replacement. If the grill's
pressure regulator shows nicks or other damage, contact your dealer for genuine Broilmaster replacement parts.
1
B102221-4-0119
CONNECTING PROPANE GAS GRILL
Cylinder in the opening in the bottom of
the Cart and secure it with the Cylinder
Retaining Bracket. Tighten Wing Nut to
Remove Grease Cup if necessary for
ease of installation.
WARNING
Loosen Wing Nut to slide Retaining
Bracket in position. Position the LP
secure position.
3
2
Page 39
Advertisement
Table of Contents
