Table of Contents
Advertisement
Venturi Tubes
The venturi tubes allow air and gas to mix prior to burning,
ensuring an efficient flame. Spiders or other small insects may
build webs or nests inside the tubes obstructing air flow. This can
cause a fire, or flashback, around the obstructed venturi tubes
and may damage to components beneath the grill or an unsafe
condition. To reduce risk, inspect and clean the venturi tubes
at least twice per year and more often if spiders are active. If
the grill has been unused for an extended period of time inspect
the tubes before using the grill.
Cleaning Venturi Tubes
1. Remove the cooking grids and drain pan.
2. Remove the burner from the grill.
3. Lay the burner face down and remove the four retaining
screws from the venturi tube plate and the burner.
See Figure Below.
4. Use a small flexible brush to remove any debris for the
tube(s).
5. Flush with water.
6. Allow the tube(s) to dry before reinstalling.
7. Reattach the venturi, collector box, and bracket in the reverse
order removed.
8. Reinstall burner, drip pan, and cooking grids.
CLEANING VENTURI TUBES
B102221-4-0119
MAINTENANCE
Exterior Cleaning
Turn off the grill and allow it to cool before cleaning. Never use
aerosol sprays or flammable cleaners on or near a hot grill.
Do note use abrasive pads or cleansers on stainless or painted
components.
Clean the grill exterior regularly with a solution of mild detergent
and hot water.
Touch-up paint is available from your dealer.
To protect your grill from the elements, use a Broilmaster protec-
tive cover Clean stainless steel components with a stainless steel
cleaner available in most hardware stores.
Page 47
Advertisement
Table of Contents
