Table of Contents
Advertisement
3. Terminal Setup
To configure the system, connect a serial cable to a COM port on a PC or
notebook computer and to RJ45 type of serial port of the Managed PoE Switch.
PC / Workstation
with
Terminal Emulation Software
Figure 3-1: Managed PoE Switch Console Connectivity
A terminal program is required to make the software connection to the Managed
PoE Switch. Putty or Tera Term may be a good choice.
1. Run terminal program Tera Term on the OS.
2. When the following screen appears, make sure that the COM port should be
configured as:
Speed: 115200
Data: 8 bits
Parity: None
Stop bits: 1
Flow control: None
RS232 to RJ45 Cable
Serial Port
Figure 3-2: COM Port Configuration
Managed Switch
RJ45
Console Port
5
Advertisement
Table of Contents
