Table of Contents
Advertisement
3.1 Logging on to Console
Once the terminal is connected to the device, power on the Managed PoE Switch,
and the terminal will display "running testing procedures". Then, the following
message asks to log in username and password. The factory default user name
and password are shown as follows and the login screen in Figure 3-3 appears
Username: admin
Password: admin
Figure 3-3: Managed PoE Switch Console Login Screen
The user can now enter commands to manage the Managed PoE Switch. For a
detailed description of the commands, please refer to the following chapters.
1. For security reason, please change and memorize the new pass-
word after this first setup.
2. Only accept command in lowercase letter under console interface.
Note
6
Advertisement
Table of Contents
