Table of Contents
Advertisement
3.3 Storing Current Switch Configuration
In the Managed PoE Switch, the running configuration sequence running-config
can be saved from the RAM to FLASH by "copy" command, so that the running
configuration sequence becomes the start-up configuration file, which is called
configuration save.
At the "#" prompt, enter the following command and press <Enter>.
# copy running-config startup-config
Figure 3-6: Saving Current Configuration Command Screen
If you are not familiar with the console command or the related
parameter, enter "help" anytime in console to get the help
description.
Note
9
Advertisement
Table of Contents
